---
anta.tests.aaa:
  - VerifyAcctConsoleMethods:
      # Verifies the AAA accounting console method lists for different accounting types (system, exec, commands, dot1x).
      methods:
        - local
        - none
        - logging
      types:
        - system
        - exec
        - commands
        - dot1x
  - VerifyAcctDefaultMethods:
      # Verifies the AAA accounting default method lists for different accounting types (system, exec, commands, dot1x).
      methods:
        - local
        - none
        - logging
      types:
        - system
        - exec
        - commands
        - dot1x
  - VerifyAuthenMethods:
      # Verifies the AAA authentication method lists for different authentication types (login, enable, dot1x).
      methods:
        - local
        - none
        - logging
      types:
        - login
        - enable
        - dot1x
  - VerifyAuthzMethods:
      # Verifies the AAA authorization method lists for different authorization types (commands, exec).
      methods:
        - local
        - none
        - logging
      types:
        - commands
        - exec
  - VerifyTacacsServerGroups:
      # Verifies if the provided TACACS server group(s) are configured.
      groups:
        - TACACS-GROUP1
        - TACACS-GROUP2
  - VerifyTacacsServers:
      # Verifies TACACS servers are configured for a specified VRF.
      servers:
        - 10.10.10.21
        - 10.10.10.22
      vrf: MGMT
  - VerifyTacacsSourceIntf:
      # Verifies TACACS source-interface for a specified VRF.
      intf: Management0
      vrf: MGMT
anta.tests.avt:
  - VerifyAVTPathHealth:
      # Verifies the status of all AVT paths for all VRFs.
  - VerifyAVTRole:
      # Verifies the AVT role of a device.
      role: edge
  - VerifyAVTSpecificPath:
      # Verifies the Adaptive Virtual Topology (AVT) path.
      avt_paths:
        - avt_name: CONTROL-PLANE-PROFILE
          vrf: default
          destination: 10.101.255.2
          next_hop: 10.101.255.1
          path_type: direct
anta.tests.bfd:
  - VerifyBFDPeersHealth:
      # Verifies the health of IPv4 BFD peers across all VRFs.
      down_threshold: 2
  - VerifyBFDPeersIntervals:
      # Verifies the timers of IPv4 BFD peer sessions.
      bfd_peers:
        - peer_address: 192.0.255.8
          vrf: default
          tx_interval: 1200
          rx_interval: 1200
          multiplier: 3
        - peer_address: 192.0.255.7
          vrf: default
          tx_interval: 1200
          rx_interval: 1200
          multiplier: 3
  - VerifyBFDPeersRegProtocols:
      # Verifies the registered routing protocol of IPv4 BFD peer sessions.
      bfd_peers:
        - peer_address: 192.0.255.7
          vrf: default
          protocols:
            - bgp
  - VerifyBFDSpecificPeers:
      # Verifies the state of IPv4 BFD peer sessions.
      bfd_peers:
        - peer_address: 192.0.255.8
          vrf: default
        - peer_address: 192.0.255.7
          vrf: default
anta.tests.configuration:
  - VerifyRunningConfigDiffs:
      # Verifies there is no difference between the running-config and the startup-config.
  - VerifyRunningConfigLines:
      # Search the Running-Config for the given RegEx patterns.
      regex_patterns:
        - "^enable password.*$"
        - "bla bla"
  - VerifyZeroTouch:
      # Verifies ZeroTouch is disabled.
anta.tests.connectivity:
  - VerifyLLDPNeighbors:
      # Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors.
      neighbors:
        - port: Ethernet1
          neighbor_device: DC1-SPINE1
          neighbor_port: Ethernet1
        - port: Ethernet2
          neighbor_device: DC1-SPINE2
          neighbor_port: Ethernet1
  - VerifyReachability:
      # Test network reachability to one or many destination IP(s).
      hosts:
        - source: Management0
          destination: 1.1.1.1
          vrf: MGMT
          df_bit: True
          size: 100
        - source: Management0
          destination: 8.8.8.8
          vrf: MGMT
          df_bit: True
          size: 100
anta.tests.cvx:
  - VerifyActiveCVXConnections:
      # Verifies the number of active CVX Connections.
      connections_count: 100
  - VerifyCVXClusterStatus:
      # Verifies the CVX Server Cluster status.
      role: Master
      peer_status:
        - peer_name : cvx-red-2
          registration_state: Registration complete
        - peer_name: cvx-red-3
          registration_state: Registration error
  - VerifyManagementCVX:
      # Verifies the management CVX global status.
      enabled: true
  - VerifyMcsClientMounts:
      # Verify if all MCS client mounts are in mountStateMountComplete.
  - VerifyMcsServerMounts:
      # Verify if all MCS server mounts are in a MountComplete state.
      connections_count: 100
anta.tests.field_notices:
  - VerifyFieldNotice44Resolution:
      # Verifies that the device is using the correct Aboot version per FN0044.
  - VerifyFieldNotice72Resolution:
      # Verifies if the device is exposed to FN0072, and if the issue has been mitigated.
anta.tests.flow_tracking:
  - VerifyHardwareFlowTrackerStatus:
      # Verifies if hardware flow tracking is running and an input tracker is active. Optionally verifies the tracker interval/timeout and exporter configuration.
      trackers:
        - name: FLOW-TRACKER
          record_export:
            on_inactive_timeout: 70000
            on_interval: 300000
          exporters:
            - name: CV-TELEMETRY
              local_interface: Loopback0
              template_interval: 3600000
anta.tests.greent:
  - VerifyGreenT:
      # Verifies if a GreenT policy other than the default is created.
  - VerifyGreenTCounters:
      # Verifies if the GreenT counters are incremented.
anta.tests.hardware:
  - VerifyAdverseDrops:
      # Verifies there are no adverse drops on DCS-7280 and DCS-7500 family switches.
  - VerifyEnvironmentCooling:
      # Verifies the status of power supply fans and all fan trays.
      states:
        - ok
  - VerifyEnvironmentPower:
      # Verifies the power supplies status.
      states:
        - ok
  - VerifyEnvironmentSystemCooling:
      # Verifies the device's system cooling status.
  - VerifyTemperature:
      # Verifies if the device temperature is within acceptable limits.
  - VerifyTransceiversManufacturers:
      # Verifies if all the transceivers come from approved manufacturers.
      manufacturers:
        - Not Present
        - Arista Networks
        - Arastra, Inc.
  - VerifyTransceiversTemperature:
      # Verifies if all the transceivers are operating at an acceptable temperature.
anta.tests.interfaces:
  - VerifyIPProxyARP:
      # Verifies if Proxy ARP is enabled.
      interfaces:
        - Ethernet1
        - Ethernet2
  - VerifyIllegalLACP:
      # Verifies there are no illegal LACP packets in all port channels.
  - VerifyInterfaceDiscards:
      # Verifies that the interfaces packet discard counters are equal to zero.
  - VerifyInterfaceErrDisabled:
      # Verifies there are no interfaces in the errdisabled state.
  - VerifyInterfaceErrors:
      # Verifies that the interfaces error counters are equal to zero.
  - VerifyInterfaceIPv4:
      # Verifies the interface IPv4 addresses.
      interfaces:
        - name: Ethernet2
          primary_ip: 172.30.11.1/31
          secondary_ips:
            - 10.10.10.1/31
            - 10.10.10.10/31
  - VerifyInterfaceUtilization:
      # Verifies that the utilization of interfaces is below a certain threshold.
      threshold: 70.0
  - VerifyInterfacesSpeed:
      # Verifies the speed, lanes, auto-negotiation status, and mode as full duplex for interfaces.
      interfaces:
        - name: Ethernet2
          auto: False
          speed: 10
        - name: Eth3
          auto: True
          speed: 100
          lanes: 1
        - name: Eth2
          auto: False
          speed: 2.5
  - VerifyInterfacesStatus:
      # Verifies the operational states of specified interfaces to ensure they match expected configurations.
      interfaces:
        - name: Ethernet1
          status: up
        - name: Port-Channel100
          status: down
          line_protocol_status: lowerLayerDown
        - name: Ethernet49/1
          status: adminDown
          line_protocol_status: notPresent
  - VerifyIpVirtualRouterMac:
      # Verifies the IP virtual router MAC address.
      mac_address: 00:1c:73:00:dc:01
  - VerifyL2MTU:
      # Verifies the global L2 MTU of all L2 interfaces.
      mtu: 1500
      ignored_interfaces:
        - Management1
        - Vxlan1
      specific_mtu:
        - Ethernet1/1: 1500
  - VerifyL3MTU:
      # Verifies the global L3 MTU of all L3 interfaces.
      mtu: 1500
      ignored_interfaces:
          - Vxlan1
      specific_mtu:
          - Ethernet1: 2500
  - VerifyLACPInterfacesStatus:
      # Verifies the Link Aggregation Control Protocol (LACP) status of the interface.
      interfaces:
        - name: Ethernet1
          portchannel: Port-Channel100
  - VerifyLoopbackCount:
      # Verifies the number of loopback interfaces and their status.
      number: 3
  - VerifyPortChannels:
      # Verifies there are no inactive ports in all port channels.
  - VerifySVI:
      # Verifies the status of all SVIs.
  - VerifyStormControlDrops:
      # Verifies there are no interface storm-control drop counters.
anta.tests.lanz:
  - VerifyLANZ:
      # Verifies if LANZ is enabled.
anta.tests.logging:
  - VerifyLoggingAccounting:
      # Verifies if AAA accounting logs are generated.
  - VerifyLoggingErrors:
      # Verifies there are no syslog messages with a severity of ERRORS or higher.
  - VerifyLoggingHostname:
      # Verifies if logs are generated with the device FQDN.
  - VerifyLoggingHosts:
      # Verifies logging hosts (syslog servers) for a specified VRF.
      hosts:
        - 1.1.1.1
        - 2.2.2.2
      vrf: default
  - VerifyLoggingLogsGeneration:
      # Verifies if logs are generated.
  - VerifyLoggingPersistent:
      # Verifies if logging persistent is enabled and logs are saved in flash.
  - VerifyLoggingSourceIntf:
      # Verifies logging source-interface for a specified VRF.
      interface: Management0
      vrf: default
  - VerifyLoggingTimestamp:
      # Verifies if logs are generated with the appropriate timestamp.
anta.tests.mlag:
  - VerifyMlagConfigSanity:
      # Verifies there are no MLAG config-sanity inconsistencies.
  - VerifyMlagDualPrimary:
      # Verifies the MLAG dual-primary detection parameters.
      detection_delay: 200
      errdisabled: True
      recovery_delay: 60
      recovery_delay_non_mlag: 0
  - VerifyMlagInterfaces:
      # Verifies there are no inactive or active-partial MLAG ports.
  - VerifyMlagPrimaryPriority:
      # Verifies the configuration of the MLAG primary priority.
      primary_priority: 3276
  - VerifyMlagReloadDelay:
      # Verifies the reload-delay parameters of the MLAG configuration.
      reload_delay: 300
      reload_delay_non_mlag: 330
  - VerifyMlagStatus:
      # Verifies the health status of the MLAG configuration.
anta.tests.multicast:
  - VerifyIGMPSnoopingGlobal:
      # Verifies the IGMP snooping global status.
      enabled: True
  - VerifyIGMPSnoopingVlans:
      # Verifies the IGMP snooping status for the provided VLANs.
      vlans:
        10: False
        12: False
anta.tests.path_selection:
  - VerifyPathsHealth:
      # Verifies the path and telemetry state of all paths under router path-selection.
  - VerifySpecificPath:
      # Verifies the path and telemetry state of a specific path for an IPv4 peer under router path-selection.
      paths:
        - peer: 10.255.0.1
          path_group: internet
          source_address: 100.64.3.2
          destination_address: 100.64.1.2
anta.tests.profiles:
  - VerifyTcamProfile:
      # Verifies the device TCAM profile.
      profile: vxlan-routing
  - VerifyUnifiedForwardingTableMode:
      # Verifies the device is using the expected UFT mode.
      mode: 3
anta.tests.ptp:
  - VerifyPtpGMStatus:
      # Verifies that the device is locked to a valid PTP Grandmaster.
      gmid: 0xec:46:70:ff:fe:00:ff:a9
  - VerifyPtpLockStatus:
      # Verifies that the device was locked to the upstream PTP GM in the last minute.
  - VerifyPtpModeStatus:
      # Verifies that the device is configured as a PTP Boundary Clock.
  - VerifyPtpOffset:
      # Verifies that the PTP timing offset is within +/- 1000ns from the master clock.
  - VerifyPtpPortModeStatus:
      # Verifies the PTP interfaces state.
anta.tests.routing.bgp:
  - VerifyBGPAdvCommunities:
      # Verifies that advertised communities are standard, extended and large for BGP peers.
      bgp_peers:
        - peer_address: 172.30.11.17
          vrf: default
        - peer_address: 172.30.11.21
          vrf: default
  - VerifyBGPExchangedRoutes:
      # Verifies the advertised and received routes of BGP peers.
      bgp_peers:
        - peer_address: 172.30.255.5
          vrf: default
          advertised_routes:
            - 192.0.254.5/32
          received_routes:
            - 192.0.255.4/32
        - peer_address: 172.30.255.1
          vrf: default
          advertised_routes:
            - 192.0.255.1/32
            - 192.0.254.5/32
          received_routes:
            - 192.0.254.3/32
  - VerifyBGPPeerASNCap:
      # Verifies the four octet ASN capability of BGP peers.
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
  - VerifyBGPPeerCount:
      # Verifies the count of BGP peers for given address families.
      address_families:
        - afi: "evpn"
          num_peers: 2
        - afi: "ipv4"
          safi: "unicast"
          vrf: "PROD"
          num_peers: 2
        - afi: "ipv4"
          safi: "unicast"
          vrf: "default"
          num_peers: 3
        - afi: "ipv4"
          safi: "multicast"
          vrf: "DEV"
          num_peers: 3
  - VerifyBGPPeerDropStats:
      # Verifies BGP NLRI drop statistics for the provided BGP IPv4 peer(s).
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
          drop_stats:
            - inDropAsloop
            - prefixEvpnDroppedUnsupportedRouteType
  - VerifyBGPPeerMD5Auth:
      # Verifies the MD5 authentication and state of IPv4 BGP peers in a specified VRF.
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
        - peer_address: 172.30.11.5
          vrf: default
  - VerifyBGPPeerMPCaps:
      # Verifies the multiprotocol capabilities of BGP peers.
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
          strict: False
          capabilities:
            - ipv4Unicast
  - VerifyBGPPeerRouteLimit:
      # Verifies maximum routes and outbound route-maps of BGP IPv4 peer(s).
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
          maximum_routes: 12000
          warning_limit: 10000
  - VerifyBGPPeerRouteRefreshCap:
      # Verifies the route refresh capabilities of a BGP peer in a specified VRF.
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
  - VerifyBGPPeerUpdateErrors:
      # Verifies BGP update error counters for the provided BGP IPv4 peer(s).
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
          update_errors:
            - inUpdErrWithdraw
  - VerifyBGPPeersHealth:
      # Verifies the health of BGP peers for given address families.
      address_families:
        - afi: "evpn"
        - afi: "ipv4"
          safi: "unicast"
          vrf: "default"
        - afi: "ipv6"
          safi: "unicast"
          vrf: "DEV"
          check_tcp_queues: false
  - VerifyBGPSpecificPeers:
      # Verifies the health of specific BGP peer(s) for given address families.
      address_families:
        - afi: "evpn"
          peers:
            - 10.1.0.1
            - 10.1.0.2
        - afi: "ipv4"
          safi: "unicast"
          peers:
            - 10.1.254.1
            - 10.1.255.0
            - 10.1.255.2
            - 10.1.255.4
  - VerifyBGPTimers:
      # Verifies the timers of BGP peers.
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
          hold_time: 180
          keep_alive_time: 60
        - peer_address: 172.30.11.5
          vrf: default
          hold_time: 180
          keep_alive_time: 60
  - VerifyBgpRouteMaps:
      # Verifies BGP inbound and outbound route-maps of BGP IPv4 peer(s).
      bgp_peers:
        - peer_address: 172.30.11.1
          vrf: default
          inbound_route_map: RM-MLAG-PEER-IN
          outbound_route_map: RM-MLAG-PEER-OUT
  - VerifyEVPNType2Route:
      # Verifies the EVPN Type-2 routes for a given IPv4 or MAC address and VNI.
      vxlan_endpoints:
        - address: 192.168.20.102
          vni: 10020
        - address: aac1.ab5d.b41e
          vni: 10010
anta.tests.routing.generic:
  - VerifyIPv4RouteType:
      # Verifies the route-type of the IPv4 prefixes.
      routes_entries:
        - prefix: 10.10.0.1/32
          vrf: default
          route_type: eBGP
        - prefix: 10.100.0.12/31
          vrf: default
          route_type: connected
        - prefix: 10.100.1.5/32
          vrf: default
          route_type: iBGP
  - VerifyRoutingProtocolModel:
      # Verifies the configured routing protocol model.
      model: multi-agent
  - VerifyRoutingTableEntry:
      # Verifies that the provided routes are present in the routing table of a specified VRF.
      vrf: default
      routes:
        - 10.1.0.1
        - 10.1.0.2
  - VerifyRoutingTableSize:
      # Verifies the size of the IP routing table of the default VRF.
      minimum: 2
      maximum: 20
anta.tests.routing.isis:
  - VerifyISISInterfaceMode:
      # Verifies interface mode for IS-IS
      interfaces:
        - name: Loopback0
          mode: passive
          # vrf is set to default by default
        - name: Ethernet2
          mode: passive
          level: 2
          # vrf is set to default by default
        - name: Ethernet1
          mode: point-to-point
          vrf: default
          # level is set to 2 by default
  - VerifyISISNeighborCount:
      # Verifies number of IS-IS neighbors per level and per interface.
      interfaces:
        - name: Ethernet1
          level: 1
          count: 2
        - name: Ethernet2
          level: 2
          count: 1
        - name: Ethernet3
          count: 2
          # level is set to 2 by default
  - VerifyISISNeighborState:
      # Verifies all IS-IS neighbors are in UP state.
  - VerifyISISSegmentRoutingAdjacencySegments:
      # Verify that all expected Adjacency segments are correctly visible for each interface.
      instances:
        - name: CORE-ISIS
          vrf: default
          segments:
            - interface: Ethernet2
              address: 10.0.1.3
              sid_origin: dynamic
  - VerifyISISSegmentRoutingDataplane:
      # Verify dataplane of a list of ISIS-SR instances.
      instances:
        - name: CORE-ISIS
          vrf: default
          dataplane: MPLS
  - VerifyISISSegmentRoutingTunnels:
      # Verify ISIS-SR tunnels computed by device.
      entries:
        # Check only endpoint
        - endpoint: 1.0.0.122/32
        # Check endpoint and via TI-LFA
        - endpoint: 1.0.0.13/32
          vias:
            - type: tunnel
              tunnel_id: ti-lfa
        # Check endpoint and via IP routers
        - endpoint: 1.0.0.14/32
          vias:
            - type: ip
              nexthop: 1.1.1.1
anta.tests.routing.ospf:
  - VerifyOSPFMaxLSA:
      # Verifies all OSPF instances did not cross the maximum LSA threshold.
  - VerifyOSPFNeighborCount:
      # Verifies the number of OSPF neighbors in FULL state is the one we expect.
      number: 3
  - VerifyOSPFNeighborState:
      # Verifies all OSPF neighbors are in FULL state.
anta.tests.security:
  - VerifyAPIHttpStatus:
      # Verifies if eAPI HTTP server is disabled globally.
  - VerifyAPIHttpsSSL:
      # Verifies if the eAPI has a valid SSL profile.
      profile: default
  - VerifyAPIIPv4Acl:
      # Verifies if eAPI has the right number IPv4 ACL(s) configured for a specified VRF.
      number: 3
      vrf: default
  - VerifyAPIIPv6Acl:
      # Verifies if eAPI has the right number IPv6 ACL(s) configured for a specified VRF.
      number: 3
      vrf: default
  - VerifyAPISSLCertificate:
      # Verifies the eAPI SSL certificate expiry, common subject name, encryption algorithm and key size.
      certificates:
        - certificate_name: ARISTA_SIGNING_CA.crt
          expiry_threshold: 30
          common_name: AristaIT-ICA ECDSA Issuing Cert Authority
          encryption_algorithm: ECDSA
          key_size: 256
        - certificate_name: ARISTA_ROOT_CA.crt
          expiry_threshold: 30
          common_name: Arista Networks Internal IT Root Cert Authority
          encryption_algorithm: RSA
          key_size: 4096
  - VerifyBannerLogin:
      # Verifies the login banner of a device.
      login_banner: |
        # Copyright (c) 2023-2024 Arista Networks, Inc.
        # Use of this source code is governed by the Apache License 2.0
        # that can be found in the LICENSE file.
  - VerifyBannerMotd:
      # Verifies the motd banner of a device.
      motd_banner: |
        # Copyright (c) 2023-2024 Arista Networks, Inc.
        # Use of this source code is governed by the Apache License 2.0
        # that can be found in the LICENSE file.
  - VerifyHardwareEntropy:
      # Verifies hardware entropy generation is enabled on device.
  - VerifyIPSecConnHealth:
      # Verifies all IPv4 security connections.
  - VerifyIPv4ACL:
      # Verifies the configuration of IPv4 ACLs.
      ipv4_access_lists:
        - name: default-control-plane-acl
          entries:
            - sequence: 10
              action: permit icmp any any
            - sequence: 20
              action: permit ip any any tracked
            - sequence: 30
              action: permit udp any any eq bfd ttl eq 255
        - name: LabTest
          entries:
            - sequence: 10
              action: permit icmp any any
            - sequence: 20
              action: permit tcp any any range 5900 5910
  - VerifySSHIPv4Acl:
      # Verifies if the SSHD agent has IPv4 ACL(s) configured.
      number: 3
      vrf: default
  - VerifySSHIPv6Acl:
      # Verifies if the SSHD agent has IPv6 ACL(s) configured.
      number: 3
      vrf: default
  - VerifySSHStatus:
      # Verifies if the SSHD agent is disabled in the default VRF.
  - VerifySpecificIPSecConn:
      # Verifies the IPv4 security connections.
      ip_security_connections:
        - peer: 10.255.0.1
        - peer: 10.255.0.2
          vrf: default
          connections:
            - source_address: 100.64.3.2
              destination_address: 100.64.2.2
            - source_address: 172.18.3.2
              destination_address: 172.18.2.2
  - VerifyTelnetStatus:
      # Verifies if Telnet is disabled in the default VRF.
anta.tests.services:
  - VerifyDNSLookup:
      # Verifies the DNS name to IP address resolution.
      domain_names:
        - arista.com
        - www.google.com
        - arista.ca
  - VerifyDNSServers:
      # Verifies if the DNS (Domain Name Service) servers are correctly configured.
      dns_servers:
        - server_address: 10.14.0.1
          vrf: default
          priority: 1
        - server_address: 10.14.0.11
          vrf: MGMT
          priority: 0
  - VerifyErrdisableRecovery:
      # Verifies the errdisable recovery reason, status, and interval.
      reasons:
        - reason: acl
          interval: 30
        - reason: bpduguard
          interval: 30
  - VerifyHostname:
      # Verifies the hostname of a device.
      hostname: s1-spine1
anta.tests.snmp:
  - VerifySnmpContact:
      # Verifies the SNMP contact of a device.
      contact: Jon@example.com
  - VerifySnmpErrorCounters:
      # Verifies the SNMP error counters.
      error_counters:
        - inVersionErrs
  - VerifySnmpIPv4Acl:
      # Verifies if the SNMP agent has IPv4 ACL(s) configured.
      number: 3
      vrf: default
  - VerifySnmpIPv6Acl:
      # Verifies if the SNMP agent has IPv6 ACL(s) configured.
      number: 3
      vrf: default
  - VerifySnmpLocation:
      # Verifies the SNMP location of a device.
      location: New York
  - VerifySnmpPDUCounters:
      # Verifies the SNMP PDU counters.
      pdus:
        - outTrapPdus
        - inGetNextPdus
  - VerifySnmpStatus:
      # Verifies if the SNMP agent is enabled.
      vrf: default
anta.tests.software:
  - VerifyEOSExtensions:
      # Verifies that all EOS extensions installed on the device are enabled for boot persistence.
  - VerifyEOSVersion:
      # Verifies the EOS version of the device.
      versions:
        - 4.25.4M
        - 4.26.1F
  - VerifyTerminAttrVersion:
      # Verifies the TerminAttr version of the device.
      versions:
        - v1.13.6
        - v1.8.0
anta.tests.stp:
  - VerifySTPBlockedPorts:
      # Verifies there is no STP blocked ports.
  - VerifySTPCounters:
      # Verifies there is no errors in STP BPDU packets.
  - VerifySTPForwardingPorts:
      # Verifies that all interfaces are forwarding for a provided list of VLAN(s).
      vlans:
        - 10
        - 20
  - VerifySTPMode:
      # Verifies the configured STP mode for a provided list of VLAN(s).
      mode: rapidPvst
      vlans:
        - 10
        - 20
  - VerifySTPRootPriority:
      # Verifies the STP root priority for a provided list of VLAN or MST instance ID(s).
      priority: 32768
      instances:
        - 10
        - 20
  - VerifyStpTopologyChanges:
      # Verifies the number of changes across all interfaces in the Spanning Tree Protocol (STP) topology is below a threshold.
      threshold: 10
anta.tests.stun:
  - VerifyStunClient:
      # (Deprecated) Verifies the translation for a source address on a STUN client.
      stun_clients:
        - source_address: 172.18.3.2
          public_address: 172.18.3.21
          source_port: 4500
          public_port: 6006
  - VerifyStunClientTranslation:
      # Verifies the translation for a source address on a STUN client.
      stun_clients:
        - source_address: 172.18.3.2
          public_address: 172.18.3.21
          source_port: 4500
          public_port: 6006
        - source_address: 100.64.3.2
          public_address: 100.64.3.21
          source_port: 4500
          public_port: 6006
  - VerifyStunServer:
      # Verifies the STUN server status is enabled and running.
anta.tests.system:
  - VerifyAgentLogs:
      # Verifies there are no agent crash reports.
  - VerifyCPUUtilization:
      # Verifies whether the CPU utilization is below 75%.
  - VerifyCoredump:
      # Verifies there are no core dump files.
  - VerifyFileSystemUtilization:
      # Verifies that no partition is utilizing more than 75% of its disk space.
  - VerifyMemoryUtilization:
      # Verifies whether the memory utilization is below 75%.
  - VerifyNTP:
      # Verifies if NTP is synchronised.
  - VerifyNTPAssociations:
      # Verifies the Network Time Protocol (NTP) associations.
      ntp_servers:
        - server_address: 1.1.1.1
          preferred: True
          stratum: 1
        - server_address: 2.2.2.2
          stratum: 2
        - server_address: 3.3.3.3
          stratum: 2
  - VerifyReloadCause:
      # Verifies the last reload cause of the device.
  - VerifyUptime:
      # Verifies the device uptime.
      minimum: 86400
anta.tests.vlan:
  - VerifyVlanInternalPolicy:
      # Verifies the VLAN internal allocation policy and the range of VLANs.
      policy: ascending
      start_vlan_id: 1006
      end_vlan_id: 4094
anta.tests.vxlan:
  - VerifyVxlan1ConnSettings:
      # Verifies the interface vxlan1 source interface and UDP port.
      source_interface: Loopback1
      udp_port: 4789
  - VerifyVxlan1Interface:
      # Verifies the Vxlan1 interface status.
  - VerifyVxlanConfigSanity:
      # Verifies there are no VXLAN config-sanity inconsistencies.
  - VerifyVxlanVniBinding:
      # Verifies the VNI-VLAN bindings of the Vxlan1 interface.
      bindings:
        10010: 10
        10020: 20
  - VerifyVxlanVtep:
      # Verifies the VTEP peers of the Vxlan1 interface.
      vteps:
        - 10.1.1.5
        - 10.1.1.6