Merging upstream version 4.0.1.

Signed-off-by: Daniel Baumann <daniel@debian.org>

tests/features/steps/basic_commands.py

@@ -64,13 +64,83 @@ def step_ctrl_d(context):
     """
     Send Ctrl + D to hopefully exit.
     """
+    step_try_to_ctrl_d(context)
+    context.cli.expect(pexpect.EOF, timeout=5)
+    context.exit_sent = True
+
+
+@when('we try to send "ctrl + d"')
+def step_try_to_ctrl_d(context):
+    """
+    Send Ctrl + D, perhaps exiting, perhaps not (if a transaction is
+    ongoing).
+    """
     # turn off pager before exiting
     context.cli.sendcontrol("c")
     context.cli.sendline(r"\pset pager off")
     wrappers.wait_prompt(context)
     context.cli.sendcontrol("d")
-    context.cli.expect(pexpect.EOF, timeout=5)
-    context.exit_sent = True
+
+
+@when('we send "ctrl + c"')
+def step_ctrl_c(context):
+    """Send Ctrl + c to hopefully interrupt."""
+    context.cli.sendcontrol("c")
+
+
+@then("we see cancelled query warning")
+def step_see_cancelled_query_warning(context):
+    """
+    Make sure we receive the warning that the current query was cancelled.
+    """
+    wrappers.expect_exact(context, "cancelled query", timeout=2)
+
+
+@then("we see ongoing transaction message")
+def step_see_ongoing_transaction_error(context):
+    """
+    Make sure we receive the warning that a transaction is ongoing.
+    """
+    context.cli.expect("A transaction is ongoing.", timeout=2)
+
+
+@when("we send sleep query")
+def step_send_sleep_15_seconds(context):
+    """
+    Send query to sleep for 15 seconds.
+    """
+    context.cli.sendline("select pg_sleep(15)")
+
+
+@when("we check for any non-idle sleep queries")
+def step_check_for_active_sleep_queries(context):
+    """
+    Send query to check for any non-idle pg_sleep queries.
+    """
+    context.cli.sendline(
+        "select state from pg_stat_activity where query not like '%pg_stat_activity%' and query like '%pg_sleep%' and state != 'idle';"
+    )
+
+
+@then("we don't see any non-idle sleep queries")
+def step_no_active_sleep_queries(context):
+    """Confirm that any pg_sleep queries are either idle or not active."""
+    wrappers.expect_exact(
+        context,
+        context.conf["pager_boundary"]
+        + "\r"
+        + dedent(
+            """
+            +-------+\r
+            | state |\r
+            |-------|\r
+            +-------+\r
+            SELECT 0\r
+        """
+        )
+        + context.conf["pager_boundary"],
+        timeout=5,
+    )
 
 
 @when(r'we send "\?" command')
@@ -131,18 +201,31 @@ def step_see_found(context):
     )
 
 
-@then("we confirm the destructive warning")
-def step_confirm_destructive_command(context):
-    """Confirm destructive command."""
+@then("we respond to the destructive warning: {response}")
+def step_resppond_to_destructive_command(context, response):
+    """Respond to destructive command."""
     wrappers.expect_exact(
         context,
-        "You're about to run a destructive command.\r\nDo you want to proceed? (y/n):",
+        "You're about to run a destructive command.\r\nDo you want to proceed? [y/N]:",
         timeout=2,
     )
-    context.cli.sendline("y")
+    context.cli.sendline(response.strip())
 
 
 @then("we send password")
 def step_send_password(context):
     wrappers.expect_exact(context, "Password for", timeout=5)
     context.cli.sendline(context.conf["pass"] or "DOES NOT MATTER")
+
+
+@when('we send "{text}"')
+def step_send_text(context, text):
+    context.cli.sendline(text)
+    # Try to detect whether we are exiting. If so, set `exit_sent`
+    # so that `after_scenario` correctly cleans up.
+    try:
+        context.cli.expect(pexpect.EOF, timeout=0.2)
+    except pexpect.TIMEOUT:
+        pass
+    else:
+        context.exit_sent = True

tests/features/steps/crud_table.py

@@ -9,6 +9,10 @@ from textwrap import dedent
 import wrappers
 
 
+INITIAL_DATA = "xxx"
+UPDATED_DATA = "yyy"
+
+
 @when("we create table")
 def step_create_table(context):
     """
@@ -22,7 +26,7 @@ def step_insert_into_table(context):
     """
     Send insert into table.
     """
-    context.cli.sendline("""insert into a(x) values('xxx');""")
+    context.cli.sendline(f"""insert into a(x) values('{INITIAL_DATA}');""")
 
 
 @when("we update table")
@@ -30,7 +34,9 @@ def step_update_table(context):
     """
     Send insert into table.
     """
-    context.cli.sendline("""update a set x = 'yyy' where x = 'xxx';""")
+    context.cli.sendline(
+        f"""update a set x = '{UPDATED_DATA}' where x = '{INITIAL_DATA}';"""
+    )
 
 
 @when("we select from table")
@@ -46,7 +52,7 @@ def step_delete_from_table(context):
     """
     Send deete from table.
     """
-    context.cli.sendline("""delete from a where x = 'yyy';""")
+    context.cli.sendline(f"""delete from a where x = '{UPDATED_DATA}';""")
 
 
 @when("we drop table")
@@ -57,6 +63,30 @@ def step_drop_table(context):
     context.cli.sendline("drop table a;")
 
 
+@when("we alter the table")
+def step_alter_table(context):
+    """
+    Alter the table by adding a column.
+    """
+    context.cli.sendline("""alter table a add column y varchar;""")
+
+
+@when("we begin transaction")
+def step_begin_transaction(context):
+    """
+    Begin transaction
+    """
+    context.cli.sendline("begin;")
+
+
+@when("we rollback transaction")
+def step_rollback_transaction(context):
+    """
+    Rollback transaction
+    """
+    context.cli.sendline("rollback;")
+
+
 @then("we see table created")
 def step_see_table_created(context):
     """
@@ -81,21 +111,42 @@ def step_see_record_updated(context):
     wrappers.expect_pager(context, "UPDATE 1\r\n", timeout=2)
 
 
-@then("we see data selected")
-def step_see_data_selected(context):
+@then("we see data selected: {data}")
+def step_see_data_selected(context, data):
     """
-    Wait to see select output.
+    Wait to see select output with initial or updated data.
+    """
+    x = UPDATED_DATA if data == "updated" else INITIAL_DATA
+    wrappers.expect_pager(
+        context,
+        dedent(
+            f"""\
+            +-----+\r
+            | x   |\r
+            |-----|\r
+            | {x} |\r
+            +-----+\r
+            SELECT 1\r
+        """
+        ),
+        timeout=1,
+    )
+
+
+@then("we see select output without data")
+def step_see_no_data_selected(context):
+    """
+    Wait to see select output without data.
     """
     wrappers.expect_pager(
         context,
         dedent(
             """\
-            +-----+\r
-            | x   |\r
-            |-----|\r
-            | yyy |\r
-            +-----+\r
-            SELECT 1\r
+            +---+\r
+            | x |\r
+            |---|\r
+            +---+\r
+            SELECT 0\r
         """
         ),
         timeout=1,
@@ -116,3 +167,19 @@ def step_see_table_dropped(context):
     Wait to see drop output.
     """
     wrappers.expect_pager(context, "DROP TABLE\r\n", timeout=2)
+
+
+@then("we see transaction began")
+def step_see_transaction_began(context):
+    """
+    Wait to see transaction began.
+    """
+    wrappers.expect_pager(context, "BEGIN\r\n", timeout=2)
+
+
+@then("we see transaction rolled back")
+def step_see_transaction_rolled_back(context):
+    """
+    Wait to see transaction rollback.
+    """
+    wrappers.expect_pager(context, "ROLLBACK\r\n", timeout=2)

tests/features/steps/expanded.py

@@ -16,7 +16,7 @@ def step_prepare_data(context):
     context.cli.sendline("drop table if exists a;")
     wrappers.expect_exact(
         context,
-        "You're about to run a destructive command.\r\nDo you want to proceed? (y/n):",
+        "You're about to run a destructive command.\r\nDo you want to proceed? [y/N]:",
         timeout=2,
     )
     context.cli.sendline("y")

tests/features/steps/wrappers.py

@@ -3,10 +3,7 @@ import pexpect
 from pgcli.main import COLOR_CODE_REGEX
 import textwrap
 
-try:
-    from StringIO import StringIO
-except ImportError:
-    from io import StringIO
+from io import StringIO
 
 
 def expect_exact(context, expected, timeout):