influx/telegraf
1
0
Fork 0
Code Issues Activity

Adding upstream version 1.34.4.

Browse source 
Signed-off-by: Daniel Baumann <daniel@debian.org>
This commit is contained in:
Daniel Baumann 2025-05-24 07:26:29 +02:00
parent e393c3af3f
commit 4978089aab
Signed by: daniel
GPG key ID: FBB4F0E80A80222F
4963 changed files with 677545 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

73
plugins/inputs/modbus/sample_metric.conf Normal file
View file

@ -0,0 +1,73 @@
## --- "metric" configuration style ---
## Per metric definition
##
## Request optimization algorithm across metrics
## |---none -- Do not perform any optimization and just group requests
## | within metrics (default)
## |---max_insert -- Collate registers across all defined metrics and fill in
## holes to optimize the number of requests.
# optimization = "none"
## Maximum number of registers the optimizer is allowed to insert between
## non-consecutive registers to save requests.
## This option is only used for the 'max_insert' optimization strategy and
## effectively denotes the hole size between registers to fill.
# optimization_max_register_fill = 50
## Define a metric produced by the requests to the device
## Multiple of those metrics can be defined. The referenced registers will
## be collated into requests send to the device
[[inputs.modbus.metric]]
## ID of the modbus slave device to query
## If you need to query multiple slave-devices, create several "metric" definitions.
slave_id = 1
## Byte order of the data
## |---ABCD -- Big Endian (Motorola)
## |---DCBA -- Little Endian (Intel)
## |---BADC -- Big Endian with byte swap
## |---CDAB -- Little Endian with byte swap
# byte_order = "ABCD"
## Name of the measurement
# measurement = "modbus"
## Field definitions
## register - type of the modbus register, can be "coil", "discrete",
## "holding" or "input". Defaults to "holding".
## address - address of the register to query. For coil and discrete inputs this is the bit address.
## name - field name
## type *1 - type of the modbus field, can be
## BIT (single bit of a register)
## INT8L, INT8H, UINT8L, UINT8H (low and high byte variants)
## INT16, UINT16, INT32, UINT32, INT64, UINT64 and
## FLOAT16, FLOAT32, FLOAT64 (IEEE 754 binary representation)
## STRING (byte-sequence converted to string)
## length *1 - (optional) number of registers, ONLY valid for STRING type
## bit *1,2 - (optional) bit of the register, ONLY valid for BIT type
## scale *1,3 - (optional) factor to scale the variable with
## output *2,3 - (optional) type of resulting field, can be INT64, UINT64 or FLOAT64. Defaults to FLOAT64 if
## "scale" is provided and to the input "type" class otherwise (i.e. INT* -> INT64, etc).
##
## *1: These fields are ignored for both "coil" and "discrete"-input type of registers.
## *2: This field can only be "UINT16" or "BOOL" if specified for both "coil"
## and "discrete"-input type of registers. By default the fields are
## output as zero or one in UINT16 format unless "BOOL" is used.
## *3: These fields cannot be used with "STRING"-type fields.
fields = [
{ register="coil", address=0, name="door_open"},
{ register="coil", address=1, name="status_ok"},
{ register="holding", address=0, name="voltage", type="INT16" },
{ address=1, name="current", type="INT32", scale=0.001 },
{ address=5, name="energy", type="FLOAT32", scale=0.001 },
{ address=7, name="frequency", type="UINT32", scale=0.1 },
{ address=8, name="power_factor", type="INT64", scale=0.01 },
{ address=9, name="firmware", type="STRING", length=8 },
]
## Tags assigned to the metric
# [inputs.modbus.metric.tags]
# machine = "impresser"
# location = "main building"