Adding upstream version 1.34.4.

Signed-off-by: Daniel Baumann <daniel@debian.org>

plugins/inputs/smart/sample.conf

@@ -0,0 +1,53 @@
+# Read metrics from storage devices supporting S.M.A.R.T.
+[[inputs.smart]]
+    ## Optionally specify the path to the smartctl executable
+    # path_smartctl = "/usr/bin/smartctl"
+
+    ## Optionally specify the path to the nvme-cli executable
+    # path_nvme = "/usr/bin/nvme"
+
+    ## Optionally specify if vendor specific attributes should be propagated for NVMe disk case
+    ## ["auto-on"] - automatically find and enable additional vendor specific disk info
+    ## ["vendor1", "vendor2", ...] - e.g. "Intel" enable additional Intel specific disk info
+    # enable_extensions = ["auto-on"]
+
+    ## On most platforms used cli utilities requires root access.
+    ## Setting 'use_sudo' to true will make use of sudo to run smartctl or nvme-cli.
+    ## Sudo must be configured to allow the telegraf user to run smartctl or nvme-cli
+    ## without a password.
+    # use_sudo = false
+
+    ## Adds an extra tag "device_type", which can be used to differentiate
+    ## multiple disks behind the same controller (e.g., MegaRAID).
+    # tag_with_device_type = false
+
+    ## Skip checking disks in this power mode. Defaults to
+    ## "standby" to not wake up disks that have stopped rotating.
+    ## See --nocheck in the man pages for smartctl.
+    ## smartctl version 5.41 and 5.42 have faulty detection of
+    ## power mode and might require changing this value to
+    ## "never" depending on your disks.
+    # nocheck = "standby"
+
+    ## Gather all returned S.M.A.R.T. attribute metrics and the detailed
+    ## information from each drive into the 'smart_attribute' measurement.
+    # attributes = false
+
+    ## Optionally specify devices to exclude from reporting if disks auto-discovery is performed.
+    # excludes = [ "/dev/pass6" ]
+
+    ## Optionally specify devices and device type, if unset
+    ## a scan (smartctl --scan and smartctl --scan -d nvme) for S.M.A.R.T. devices will be done
+    ## and all found will be included except for the excluded in excludes.
+    # devices = [ "/dev/ada0 -d atacam", "/dev/nvme0"]
+
+    ## Timeout for the cli command to complete.
+    # timeout = "30s"
+
+    ## Optionally call smartctl and nvme-cli with a specific concurrency policy.
+    ## By default, smartctl and nvme-cli are called in separate threads (goroutines) to gather disk attributes.
+    ## Some devices (e.g. disks in RAID arrays) may have access limitations that require sequential reading of
+    ## SMART data - one individual array drive at the time. In such case please set this configuration option
+    ## to "sequential" to get readings for all drives.
+    ## valid options: concurrent, sequential
+    # read_method = "concurrent"