Adding upstream version 4.3+20240723.
Signed-off-by: Daniel Baumann <daniel@debian.org>
This commit is contained in:
parent
c0f6a5a1b7
commit
3ea4f9a80b
GPG key ID:
FBB4F0E80A80222F
70 changed files with 1465 additions and 1206 deletions
|
|
@ -17,11 +17,7 @@ check wait
|
|||
mdadm $md0 --fail $dev0
|
||||
mdadm $md0 --remove $dev3 $dev0
|
||||
check recovery
|
||||
check state _UUU
|
||||
|
||||
mdadm $md0 -a $dev3
|
||||
check recovery
|
||||
check wait
|
||||
check state UUUU
|
||||
|
||||
mdadm -S $md0
|
||||
mdadm -S $md0
|
||||
|
|
|
|||
|
|
@ -1,7 +0,0 @@
|
|||
fails rarely
|
||||
|
||||
Fails about 1 in every 30 runs with a sha mismatch error:
|
||||
|
||||
c49ab26e1b01def7874af9b8a6d6d0c29fdfafe6 /dev/md0 does not match
|
||||
15dc2f73262f811ada53c65e505ceec9cf025cb9 /dev/md0 with /dev/loop3
|
||||
missing
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
fails infrequently
|
||||
|
||||
Fails about 1 in 5 with a sha mismatch:
|
||||
|
||||
8286c2bc045ae2cfe9f8b7ae3a898fa25db6926f /dev/md0 does not match
|
||||
a083a0738b58caab37fd568b91b177035ded37df /dev/md0 with /dev/loop2 and
|
||||
/dev/loop3 missing
|
||||
|
|
@ -9,15 +9,23 @@ set -x -e
|
|||
levels=(raid0 raid1 raid5)
|
||||
|
||||
if [ "$LINEAR" == "yes" ]; then
|
||||
levels+=( linear )
|
||||
levels+=( linear )
|
||||
fi
|
||||
|
||||
is_raid_foreign $md0
|
||||
|
||||
for l in ${levels[@]}
|
||||
do
|
||||
mdadm -CR $md0 -l $l -n5 $dev0 $dev1 $dev2 $dev3 $dev4 --assume-clean
|
||||
mdadm -S md0
|
||||
mdadm -I $dev1
|
||||
mdadm -I $dev3
|
||||
mdadm -A /dev/md0 $dev0 $dev1 $dev2 $dev3 $dev4
|
||||
mdadm -S /dev/md0
|
||||
mdadm -CR $md0 -l $l -n5 $dev0 $dev1 $dev2 $dev3 $dev4 --assume-clean
|
||||
mdadm -S $md0
|
||||
mdadm -I $dev1
|
||||
mdadm -I $dev3
|
||||
mdadm -A $md0 $dev0 $dev1 $dev2 $dev3 $dev4
|
||||
# If one array is foreign (metadata name doesn't have the machine's
|
||||
# hostname), mdadm chooses a minor number automatically from 127
|
||||
if [ $is_foreign == "no" ]; then
|
||||
mdadm -S $md0
|
||||
else
|
||||
mdadm -S $md127
|
||||
fi
|
||||
done
|
||||
|
|
|
|||
|
|
@ -33,16 +33,6 @@ mdadm -As -c $conf $md2
|
|||
$tst
|
||||
mdadm -S $md2
|
||||
|
||||
{
|
||||
echo DEVICE $devlist
|
||||
echo array $md2 name=2
|
||||
} > $conf
|
||||
|
||||
mdadm -As -c $conf $md2
|
||||
$tst
|
||||
mdadm -S $md2
|
||||
|
||||
|
||||
{
|
||||
echo DEVICE $devlist
|
||||
echo array $md2 devices=$dev0,$dev1,$dev2
|
||||
|
|
|
|||
|
|
@ -1,12 +0,0 @@
|
|||
|
||||
# Create an array, fail one device while array is active, stop array,
|
||||
# then re-assemble listing the failed device first.
|
||||
|
||||
mdadm -CR $md1 -l5 -n4 $dev0 $dev1 $dev2 $dev3
|
||||
check wait
|
||||
|
||||
echo 2000 > /sys/block/md1/md/safe_mode_delay
|
||||
mkfs $md1
|
||||
mdadm $md1 -f $dev0
|
||||
mdadm -S $md1
|
||||
mdadm -A $md1 $dev0 $dev1 $dev2 $dev3 || exit 1
|
||||
|
|
@ -31,14 +31,6 @@ conf=$targetdir/mdadm.conf
|
|||
mdadm -As -c $conf $md1
|
||||
eval $tst
|
||||
|
||||
{
|
||||
echo DEVICE $devlist
|
||||
echo array $md1 name=one
|
||||
} > $conf
|
||||
|
||||
mdadm -As -c $conf
|
||||
eval $tst
|
||||
|
||||
{
|
||||
echo DEVICE $devlist
|
||||
echo array $md1 devices=$dev0,$dev1,$dev2,$dev3,$dev4
|
||||
|
|
@ -88,15 +80,6 @@ mdadm -As -c $conf $md1
|
|||
check state U_U
|
||||
eval $tst
|
||||
|
||||
{
|
||||
echo DEVICE $devlist
|
||||
echo array $md1 name=one
|
||||
} > $conf
|
||||
|
||||
mdadm -As -c $conf
|
||||
check state U_U
|
||||
eval $tst
|
||||
|
||||
{
|
||||
echo DEVICE $devlist
|
||||
echo array $md1 devices=$dev0,$dev1,$dev2
|
||||
|
|
|
|||
|
|
@ -1,7 +0,0 @@
|
|||
always fails
|
||||
|
||||
Fails with errors:
|
||||
|
||||
mdadm: /dev/loop0 has no superblock - assembly aborted
|
||||
|
||||
ERROR: no recovery happening
|
||||
|
|
@ -8,24 +8,29 @@ set -xe
|
|||
|
||||
dlist="$dev0 $dev1 $dev2 $dev3"
|
||||
|
||||
for ls in linear/4 raid1/1 raid5/3 raid6/2
|
||||
if [ $skipping_linear == "yes" ]; then
|
||||
level_list="raid1/1 raid5/3 raid6/2"
|
||||
else
|
||||
level_list="linear/4 raid1/1 raid5/3 raid6/2"
|
||||
fi
|
||||
for ls in $level_list
|
||||
do
|
||||
s=${ls#*/} l=${ls%/*}
|
||||
if [[ $l == 'raid1' ]]; then
|
||||
mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 $dlist
|
||||
else
|
||||
mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
|
||||
fi
|
||||
testdev $md0 $s 19904 64
|
||||
mdadm -S $md0
|
||||
mdadm -A $md0 --update=metadata $dlist
|
||||
testdev $md0 $s 19904 64 check
|
||||
mdadm -S $md0
|
||||
s=${ls#*/} l=${ls%/*}
|
||||
if [[ $l == 'raid1' ]]; then
|
||||
mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 $dlist
|
||||
else
|
||||
mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
|
||||
fi
|
||||
testdev $md0 $s 19904 64
|
||||
mdadm -S $md0
|
||||
mdadm -A $md0 --update=metadata $dlist
|
||||
testdev $md0 $s 19904 64 check
|
||||
mdadm -S $md0
|
||||
done
|
||||
|
||||
if mdadm -A $md0 --update=metadata $dlist
|
||||
then echo >&2 should fail with v1.0 metadata
|
||||
exit 1
|
||||
exit 1
|
||||
fi
|
||||
|
||||
mdadm -CR -e 0.90 $md0 --level=6 -n4 -c32 $dlist
|
||||
|
|
@ -33,7 +38,7 @@ mdadm -S $md0
|
|||
|
||||
if mdadm -A $md0 --update=metadata $dlist
|
||||
then echo >&2 should fail during resync
|
||||
exit 1
|
||||
exit 1
|
||||
fi
|
||||
mdadm -A $md0 $dlist
|
||||
mdadm --wait $md0 || true
|
||||
|
|
@ -48,5 +53,5 @@ mdadm -S $md0
|
|||
|
||||
if mdadm -A $md0 --update=metadata $dlist
|
||||
then echo >&2 should fail when bitmap present
|
||||
exit 1
|
||||
exit 1
|
||||
fi
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ mdadm -S /dev/md0
|
|||
|
||||
# now if we have a bitmap, that needs updating too.
|
||||
rm -f $targetdir/bitmap
|
||||
mdadm -CR --assume-clean -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
|
||||
yes | mdadm -CR --assume-clean -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
|
||||
mdadm -S /dev/md0
|
||||
mdadm -A /dev/md0 -b $targetdir/bitmap --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2
|
||||
no_errors
|
||||
|
|
@ -41,7 +41,7 @@ mdadm -S /dev/md0
|
|||
|
||||
# and bitmap for version1
|
||||
rm -f $targetdir/bitmap
|
||||
mdadm -CR --assume-clean -e1.1 -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
|
||||
yes | mdadm -CR --assume-clean -e1.1 -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
|
||||
mdadm -S /dev/md0
|
||||
mdadm -A /dev/md0 -b $targetdir/bitmap --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2
|
||||
no_errors
|
||||
|
|
|
|||
|
|
@ -1,49 +0,0 @@
|
|||
|
||||
#
|
||||
# create a raid1 with a bitmap file
|
||||
#
|
||||
bmf=$targetdir/bitmap
|
||||
rm -f $bmf
|
||||
mdadm --create --run $md0 --level=1 -n2 --delay=1 --bitmap $bmf $dev1 $dev2
|
||||
check wait
|
||||
testdev $md0 1 $mdsize1a 64
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2
|
||||
testdev $md0 1 $mdsize1a 64
|
||||
dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev1
|
||||
testdev $md0 1 $mdsize1a 64
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble -R $md0 --bitmap=$bmf $dev2
|
||||
dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
mdadm --zero $dev1 # force --add, not --re-add
|
||||
mdadm $md0 --add $dev1
|
||||
#it is too fast# check recovery
|
||||
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
|
|
@ -1,33 +0,0 @@
|
|||
|
||||
#
|
||||
# create a raid1 array, add an external bitmap
|
||||
#
|
||||
mdadm --create --run $md0 -l 1 -n 2 $dev1 $dev2
|
||||
check wait
|
||||
testdev $md0 1 $mdsize1a 64
|
||||
|
||||
bmf=$targetdir/bm
|
||||
rm -f $bmf
|
||||
#mdadm -E $dev1
|
||||
mdadm --grow $md0 --bitmap=$bmf --delay=1 || { mdadm -X $bmf ; exit 1; }
|
||||
dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
testdev $md0 1 $mdsize1a 64
|
||||
dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
#echo $dirty1 $dirty2 $dirty3 $dirty4
|
||||
if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
|
||||
then
|
||||
echo bad dirty counts
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# now to remove the bitmap
|
||||
check bitmap
|
||||
mdadm --grow $md0 --bitmap=none
|
||||
check nobitmap
|
||||
mdadm -S $md0
|
||||
|
|
@ -8,18 +8,15 @@ testdev $md0 1 $mdsize1a 64
|
|||
|
||||
#mdadm -E $dev1
|
||||
mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1 || { mdadm -X $dev2 ; exit 1; }
|
||||
sleep 4
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
testdev $md0 1 $mdsize1a 64
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
testdev $md0 1 $mdsize1a 64
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
#echo $dirty1 $dirty2 $dirty3 $dirty4
|
||||
if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
|
||||
then
|
||||
if [ $dirty1 -ne 0 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: dirty1 $dirty1, dirty2 $dirty2"
|
||||
echo bad dirty counts
|
||||
exit 1
|
||||
fi
|
||||
|
|
|
|||
|
|
@ -8,19 +8,15 @@ testdev $md0 1 $mdsize1b 64
|
|||
|
||||
#mdadm -E $dev1
|
||||
mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1
|
||||
sleep 4
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
testdev $md0 1 $mdsize1b 64
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
testdev $md0 1 $mdsize1b 64
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
#echo $dirty1 $dirty2 $dirty3 $dirty4
|
||||
if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
|
||||
then
|
||||
echo bad dirty counts
|
||||
if [ $dirty1 -ne 0 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: dirty1 $dirty1, dirty2 $dirty2"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
|
|
|
|||
|
|
@ -9,21 +9,20 @@ mdadm -S $md0
|
|||
|
||||
mdadm --assemble $md0 $dev1 $dev2
|
||||
testdev $md0 1 $mdsize0 64
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
if [ $dirty1 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev1
|
||||
testdev $md0 1 $mdsize0 64
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty2 -ne $total ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
|
|
@ -34,13 +33,12 @@ mdadm --zero-superblock $dev1
|
|||
mdadm $md0 --add $dev1
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
if [ $dirty3 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty3"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
|
|
|
|||
|
|
@ -10,21 +10,20 @@ mdadm -S $md0
|
|||
|
||||
mdadm --assemble $md0 $dev1 $dev2
|
||||
testdev $md0 1 $mdsize1b 64
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
if [ $dirty1 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev1
|
||||
testdev $md0 1 $mdsize1b 64
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty2 -ne $total ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
|
|
@ -35,13 +34,12 @@ mdadm --assemble -R $md0 $dev2
|
|||
mdadm $md0 --add $dev1
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
if [ $dirty3 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty3"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
|
|
|
|||
|
|
@ -11,21 +11,20 @@ mdadm -S $md0
|
|||
mdadm --assemble $md0 $dev1 $dev2
|
||||
check bitmap
|
||||
testdev $md0 1 $mdsize11 64
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
if [ $dirty1 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev1
|
||||
testdev $md0 1 $mdsize11 64
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty2 -ne $total ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
|
|
@ -35,14 +34,12 @@ mdadm --zero-superblock $dev1
|
|||
mdadm --assemble -R $md0 $dev2
|
||||
mdadm $md0 --add $dev1
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
if [ $dirty3 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty3"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
|
|
|
|||
|
|
@ -10,21 +10,20 @@ mdadm -S $md0
|
|||
|
||||
mdadm --assemble $md0 $dev1 $dev2
|
||||
testdev $md0 1 $mdsize12 64
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
if [ $dirty1 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev1
|
||||
testdev $md0 1 $mdsize12 64
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty2 -ne $total ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
|
|
@ -35,13 +34,12 @@ mdadm --assemble -R $md0 $dev2
|
|||
mdadm $md0 --add $dev1
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
if [ $dirty3 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty3"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
|
|
|
|||
|
|
@ -1,53 +0,0 @@
|
|||
|
||||
#
|
||||
# create a raid1 with 3 devices and a bitmap file
|
||||
# make sure resync does right thing.
|
||||
#
|
||||
#
|
||||
bmf=$targetdir/bitmap
|
||||
rm -f $bmf
|
||||
mdadm --create -e0.90 --run $md0 --level=1 -n3 --delay=1 --bitmap $bmf $dev1 $dev2 $dev3
|
||||
check wait
|
||||
testdev $md0 1 $mdsize0 64
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3
|
||||
testdev $md0 1 $mdsize0 64
|
||||
dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev2
|
||||
testdev $md0 1 $mdsize0 64
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble -R $md0 --bitmap=$bmf $dev1 $dev3
|
||||
check nosync
|
||||
mdadm --zero-superblock $dev2
|
||||
mdadm $md0 --add $dev2
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
exit 0
|
||||
|
|
@ -6,7 +6,7 @@
|
|||
#
|
||||
bmf=$targetdir/bitmap2
|
||||
rm -f $bmf
|
||||
mdadm -B $md0 -l1 -n2 -b$bmf -d1 $dev1 $dev2
|
||||
yes | mdadm -B $md0 -l1 -n2 -b$bmf -d1 $dev1 $dev2
|
||||
check resync
|
||||
check wait
|
||||
testdev $md0 1 $size 1
|
||||
|
|
|
|||
|
|
@ -1,49 +0,0 @@
|
|||
|
||||
#
|
||||
# create a raid1 with a bitmap file
|
||||
#
|
||||
bmf=$targetdir/bitmap
|
||||
rm -f $bmf
|
||||
mdadm --create --run $md0 --level=5 -n3 --delay=1 --bitmap $bmf $dev1 $dev2 $dev3
|
||||
check wait
|
||||
testdev $md0 2 $mdsize1 512
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3
|
||||
testdev $md0 2 $mdsize1 512
|
||||
dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev1
|
||||
testdev $md0 2 $mdsize1 512
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble -R $md0 --bitmap=$bmf $dev2 $dev3
|
||||
mdadm --zero $dev1 # force add, not re-add
|
||||
mdadm $md0 --add $dev1
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
|
|
@ -9,21 +9,20 @@ mdadm -S $md0
|
|||
|
||||
mdadm --assemble $md0 $dev1 $dev2 $dev3
|
||||
testdev $md0 2 $mdsize1 512
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
if [ $dirty1 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev1
|
||||
testdev $md0 2 $mdsize1 512
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty2 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
echo >&2 "ERROR dirty count $dirty2 is too small"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
|
|
@ -33,14 +32,12 @@ mdadm --assemble -R $md0 $dev2 $dev3
|
|||
mdadm --zero $dev1 # force --add, not --re-add
|
||||
mdadm $md0 --add $dev1
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
if [ $dirty3 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty3"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
|
|
|
|||
|
|
@ -1,49 +0,0 @@
|
|||
|
||||
#
|
||||
# create a raid1 with a bitmap file
|
||||
#
|
||||
bmf=$targetdir/bitmap
|
||||
rm -f $bmf
|
||||
mdadm --create --run $md0 --level=6 -n4 --delay=1 --bitmap $bmf $dev1 $dev2 $dev3 $dev4
|
||||
check wait
|
||||
testdev $md0 2 $mdsize1 512
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3 $dev4
|
||||
testdev $md0 2 $mdsize1 512
|
||||
dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
sleep 4
|
||||
dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
|
||||
then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
|
||||
exit 1
|
||||
fi
|
||||
mdadm $md0 -f $dev3
|
||||
testdev $md0 2 $mdsize1 512
|
||||
sleep 4
|
||||
dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
if [ $dirty3 -lt 400 ]
|
||||
then
|
||||
echo >&2 "ERROR dirty count $dirty3 is too small"
|
||||
exit 2
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm --assemble -R $md0 --bitmap=$bmf $dev1 $dev2 $dev4
|
||||
mdadm --zero $dev3 # force --add, not --re-add
|
||||
mdadm $md0 --add $dev3
|
||||
check recovery
|
||||
|
||||
dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
check wait
|
||||
sleep 4
|
||||
dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
|
||||
|
||||
if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
|
||||
then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
mdadm -S $md0
|
||||
12
tests/06name
12
tests/06name
|
|
@ -2,9 +2,17 @@ set -x
|
|||
|
||||
# create an array with a name
|
||||
|
||||
is_raid_foreign $md0
|
||||
|
||||
mdadm -CR $md0 -l0 -n2 --metadata=1 --name="Fred" $dev0 $dev1
|
||||
mdadm -E $dev0 | grep 'Name : Fred' > /dev/null || exit 1
|
||||
mdadm -D $md0 | grep 'Name : Fred' > /dev/null || exit 1
|
||||
|
||||
if [ $is_foreign == "no" ]; then
|
||||
mdadm -E $dev0 | grep "Name : $(hostname):Fred" > /dev/null || exit 1
|
||||
mdadm -D $md0 | grep "Name : $(hostname):Fred" > /dev/null || exit 1
|
||||
else
|
||||
mdadm -E $dev0 | grep "Name : Fred" > /dev/null || exit 1
|
||||
mdadm -D $md0 | grep "Name : Fred" > /dev/null || exit 1
|
||||
fi
|
||||
mdadm -S $md0
|
||||
|
||||
mdadm -A $md0 --name="Fred" $devlist
|
||||
|
|
|
|||
|
|
@ -2,6 +2,9 @@
|
|||
# create two raid1s, build a raid0 on top, then
|
||||
# tear it down and get auto-assemble to rebuild it.
|
||||
|
||||
#the length of md0/md1/md2 is same. So use md0 here.
|
||||
is_raid_foreign $md0
|
||||
|
||||
mdadm -CR $md1 -l1 -n2 $dev0 $dev1 --homehost=testing
|
||||
mdadm -CR $md2 -l1 -n2 $dev2 $dev3 --homehost=testing
|
||||
mdadm -CR $md0 -l0 -n2 $md1 $md2 --homehost=testing
|
||||
|
|
@ -10,7 +13,14 @@ mdadm -Ss
|
|||
mdadm -As -c /dev/null --homehost=testing -vvv
|
||||
testdev $md1 1 $mdsize1a 64
|
||||
testdev $md2 1 $mdsize1a 64
|
||||
testdev $md0 2 $mdsize11a 512
|
||||
# md1 and md2 will be incremental assemble by udev rule. And
|
||||
# the testing machines' hostname is not testing. The md0 will
|
||||
# be considered as a foreign array. It can use 0 as metadata
|
||||
# name. md127 will be used
|
||||
testdev $md127 2 $mdsize11a 512
|
||||
mdadm --stop $md127
|
||||
mdadm --zero-superblock $md1
|
||||
mdadm --zero-superblock $md2
|
||||
mdadm -Ss
|
||||
|
||||
mdadm --zero-superblock $dev0 $dev1 $dev2 $dev3
|
||||
|
|
@ -20,5 +30,31 @@ mdadm -CR $md0 -l0 -n2 $md1 $dev2 --homehost=testing
|
|||
mdadm -Ss
|
||||
mdadm -As -c /dev/null --homehost=testing -vvv
|
||||
testdev $md1 1 $mdsize1a 64
|
||||
testdev $md0 1 $[mdsize1a+mdsize11a] 512
|
||||
testdev $md127 1 $[mdsize1a+mdsize11a] 512
|
||||
mdadm --stop $md127
|
||||
mdadm --zero-superblock $md1
|
||||
mdadm -Ss
|
||||
|
||||
# Don't specify homehost when creating raid and use the test
|
||||
# machine's homehost. For super1.2, if homehost name's length
|
||||
# is > 32, it doesn't use homehost name in metadata name and
|
||||
# the array will be treated as foreign array
|
||||
mdadm --zero-superblock $dev0 $dev1 $dev2 $dev3
|
||||
mdadm -CR $md1 -l1 -n2 $dev0 $dev1
|
||||
mdadm -CR $md2 -l1 -n2 $dev2 $dev3
|
||||
mdadm -CR $md0 -l0 -n2 $md1 $md2
|
||||
mdadm -Ss
|
||||
mdadm -As -c /dev/null
|
||||
if [ $is_foreign == "yes" ]; then
|
||||
# md127 is md1
|
||||
testdev $md127 1 $mdsize1a 64
|
||||
# md126 is md0, udev rule incremental assemble it
|
||||
testdev $md126 2 $mdsize11a 512
|
||||
# md125 is md2
|
||||
testdev $md125 1 $mdsize1a 64
|
||||
else
|
||||
testdev $md1 1 $mdsize1a 64
|
||||
testdev $md2 1 $mdsize1a 64
|
||||
testdev $md0 2 $mdsize11a 512
|
||||
fi
|
||||
mdadm -Ss
|
||||
|
|
|
|||
|
|
@ -1,8 +0,0 @@
|
|||
always fails
|
||||
|
||||
Prints lots of messages, but the array doesn't assemble. Error
|
||||
possibly related to:
|
||||
|
||||
mdadm: /dev/md/1 is busy - skipping
|
||||
mdadm: no recogniseable superblock on /dev/md/testing:0
|
||||
mdadm: /dev/md/2 is busy - skipping
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
always fails
|
||||
|
||||
Fails with error:
|
||||
|
||||
ERROR: no resync happening
|
||||
|
|
@ -27,11 +27,9 @@ checkgeo() {
|
|||
}
|
||||
|
||||
restart() {
|
||||
sleep 0.5
|
||||
check reshape
|
||||
mdadm -S $md0
|
||||
mdadm -A $md0 $devs --backup-file=$bu
|
||||
sleep 0.5
|
||||
check reshape
|
||||
}
|
||||
|
||||
|
|
@ -49,13 +47,16 @@ mdadm -G $md0 --layout rs --backup-file=$bu
|
|||
restart
|
||||
checkgeo md0 raid5 5 $[128*1024] 3
|
||||
|
||||
mdadm -G $md0 --array-size 58368
|
||||
# It needs to shrink array size first. Choose a value that
|
||||
# is power of 2 for array size. If not, it can't change
|
||||
# chunk size.
|
||||
mdadm -G $md0 --array-size 51200
|
||||
mdadm -G $md0 --raid-disks 4 -c 64 --backup-file=$bu
|
||||
restart
|
||||
checkgeo md0 raid5 4 $[64*1024] 3
|
||||
|
||||
devs="$dev0 $dev1 $dev2 $dev3"
|
||||
mdadm -G $md0 --array-size 19456
|
||||
mdadm -G $md0 --array-size 18432
|
||||
mdadm -G $md0 -n 2 -c 256 --backup-file=$bu
|
||||
restart
|
||||
checkgeo md0 raid5 2 $[256*1024] 3
|
||||
|
|
|
|||
|
|
@ -1,9 +0,0 @@
|
|||
always fails
|
||||
|
||||
Fails with errors:
|
||||
|
||||
mdadm: this change will reduce the size of the array.
|
||||
use --grow --array-size first to truncate array.
|
||||
e.g. mdadm --grow /dev/md0 --array-size 56832
|
||||
|
||||
ERROR: no reshape happening
|
||||
|
|
@ -43,7 +43,7 @@ testdev $md0 2 $mdsize1 512
|
|||
mdadm -G $md0 -n 5
|
||||
sleep 3
|
||||
mdadm -S $md0
|
||||
strace -o /tmp/str ./mdadm -A $md0 --update=revert-reshape $devlist4
|
||||
mdadm -A $md0 --update=revert-reshape $devlist4
|
||||
check wait
|
||||
check raid10
|
||||
testdev $md0 2 $mdsize1 512
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ testdev $md0 3 $mdsize1 64
|
|||
mdadm -G $md0 -c 32
|
||||
sleep 2
|
||||
mdadm -S $md0
|
||||
strace -o /tmp/str ./mdadm -A $md0 --update=revert-reshape $devlist5
|
||||
mdadm -A $md0 --update=revert-reshape $devlist5
|
||||
check wait
|
||||
check raid10
|
||||
testdev $md0 3 $mdsize1 64
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ pid=""
|
|||
runtime=2
|
||||
|
||||
clean_up_test() {
|
||||
pill -9 $pid
|
||||
kill -9 $pid
|
||||
echo clear > /sys/block/md0/md/array_state
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -23,6 +23,28 @@ mdsize12=19988
|
|||
# ddf needs bigger devices as 32Meg is reserved!
|
||||
ddfsize=65536
|
||||
|
||||
# Systemd flags
|
||||
devname_as_serial_flag="IMSM_DEVNAME_AS_SERIAL=1"
|
||||
no_platform_flag="IMSM_NO_PLATFORM=1"
|
||||
|
||||
# Common colors
|
||||
COLOR_FAIL='\033[0;31m' #RED
|
||||
COLOR_WARN='\033[1;33m' #YELLOW
|
||||
COLOR_SUCCESS='\033[0;32m' #GREEN
|
||||
COLOR_NONE='\033[0m'
|
||||
|
||||
fail() {
|
||||
printf "${COLOR_FAIL}$1${COLOR_NONE}"
|
||||
}
|
||||
|
||||
warn() {
|
||||
printf "${COLOR_WARN}$1${COLOR_NONE}"
|
||||
}
|
||||
|
||||
succeed() {
|
||||
printf "${COLOR_SUCCESS}$1${COLOR_NONE}"
|
||||
}
|
||||
|
||||
# $1 is optional parameter, it shows why to save log
|
||||
save_log() {
|
||||
status=$1
|
||||
|
|
@ -36,7 +58,8 @@ save_log() {
|
|||
cat /proc/mdstat >> $logdir/$logfile
|
||||
array=($(mdadm -Ds | cut -d' ' -f2))
|
||||
[ "$1" == "fail" ] &&
|
||||
echo "FAILED - see $logdir/$_basename.log and $logdir/$logfile for details"
|
||||
fail "FAILED"
|
||||
echo " - see $logdir/$_basename.log and $logdir/$logfile for details\n"
|
||||
if [ $DEVTYPE == 'lvm' ]
|
||||
then
|
||||
# not supported lvm type yet
|
||||
|
|
@ -86,6 +109,7 @@ cleanup() {
|
|||
$mdadm --zero ${disks[@]} &> /dev/null
|
||||
;;
|
||||
esac
|
||||
clean_systemd_env
|
||||
}
|
||||
|
||||
do_clean()
|
||||
|
|
@ -125,6 +149,7 @@ check_env() {
|
|||
MULTIPATH="yes"
|
||||
if [ "$MULTIPATH" != "yes" ]; then
|
||||
echo "test: skipping tests for multipath, which is removed in upstream 6.8+ kernels"
|
||||
skipping_multipath="yes"
|
||||
fi
|
||||
|
||||
# Check whether to run linear tests
|
||||
|
|
@ -133,14 +158,75 @@ check_env() {
|
|||
LINEAR="yes"
|
||||
if [ "$LINEAR" != "yes" ]; then
|
||||
echo "test: skipping tests for linear, which is removed in upstream 6.8+ kernels"
|
||||
skipping_linear="yes"
|
||||
fi
|
||||
}
|
||||
|
||||
record_system_speed_limit() {
|
||||
system_speed_limit_max=`cat /proc/sys/dev/raid/speed_limit_max`
|
||||
system_speed_limit_min=`cat /proc/sys/dev/raid/speed_limit_min`
|
||||
}
|
||||
|
||||
# To avoid sync action finishes before checking it, it needs to limit
|
||||
# the sync speed
|
||||
control_system_speed_limit() {
|
||||
echo $test_speed_limit_min > /proc/sys/dev/raid/speed_limit_min
|
||||
echo $test_speed_limit_max > /proc/sys/dev/raid/speed_limit_max
|
||||
}
|
||||
|
||||
restore_system_speed_limit() {
|
||||
echo $system_speed_limit_min > /proc/sys/dev/raid/speed_limit_max
|
||||
echo $system_speed_limit_max > /proc/sys/dev/raid/speed_limit_max
|
||||
}
|
||||
|
||||
is_raid_foreign() {
|
||||
|
||||
name=$1
|
||||
# super1 uses this formula strlen(homehost)+1+strlen(name) < 32
|
||||
# to decide if an array is foreign or local. It adds homehost if
|
||||
# one array is local
|
||||
hostname=$(hostname)
|
||||
if [ `expr length "$(hostname)$name"` -lt 31 ]; then
|
||||
is_foreign="no"
|
||||
else
|
||||
is_foreign="yes"
|
||||
fi
|
||||
}
|
||||
|
||||
record_selinux() {
|
||||
sys_selinux=`getenforce`
|
||||
setenforce Permissive
|
||||
}
|
||||
|
||||
restore_selinux() {
|
||||
setenforce $sys_selinux
|
||||
}
|
||||
|
||||
setup_systemd_env() {
|
||||
warn "Warning! Test suite will set up systemd environment!\n"
|
||||
echo "Use \"systemctl show-environment\" to show systemd environment variables"
|
||||
for env_var in $devname_as_serial_flag $no_platform_flag
|
||||
do
|
||||
systemctl set-environment $env_var
|
||||
echo "Added $env_var" to systemd environment, use \
|
||||
\"systemctl unset-environment $env_var\" to remove it.
|
||||
done
|
||||
}
|
||||
|
||||
clean_systemd_env() {
|
||||
for env_var in $devname_as_serial_flag $no_platform_flag
|
||||
do
|
||||
systemctl unset-environment $env_var
|
||||
echo "Removed $env_var from systemd environment."
|
||||
done
|
||||
}
|
||||
|
||||
do_setup() {
|
||||
trap cleanup 0 1 3 15
|
||||
trap ctrl_c 2
|
||||
|
||||
check_env
|
||||
setup_systemd_env
|
||||
[ -d $logdir ] || mkdir -p $logdir
|
||||
|
||||
devlist=
|
||||
|
|
@ -214,6 +300,8 @@ do_setup() {
|
|||
ulimit -c unlimited
|
||||
[ -f /proc/mdstat ] || modprobe md_mod
|
||||
echo 0 > /sys/module/md_mod/parameters/start_ro
|
||||
record_system_speed_limit
|
||||
record_selinux
|
||||
}
|
||||
|
||||
# check various things
|
||||
|
|
@ -265,15 +353,17 @@ check() {
|
|||
fi
|
||||
;;
|
||||
wait )
|
||||
p=`cat /proc/sys/dev/raid/speed_limit_max`
|
||||
echo 2000000 > /proc/sys/dev/raid/speed_limit_max
|
||||
min=`cat /proc/sys/dev/raid/speed_limit_min`
|
||||
max=`cat /proc/sys/dev/raid/speed_limit_max`
|
||||
echo 200000 > /proc/sys/dev/raid/speed_limit_max
|
||||
sleep 0.1
|
||||
while grep -Eq '(resync|recovery|reshape|check|repair) *=' /proc/mdstat ||
|
||||
grep -v idle > /dev/null /sys/block/md*/md/sync_action
|
||||
do
|
||||
sleep 0.5
|
||||
done
|
||||
echo $p > /proc/sys/dev/raid/speed_limit_max
|
||||
echo $min > /proc/sys/dev/raid/speed_limit_min
|
||||
echo $max > /proc/sys/dev/raid/speed_limit_max
|
||||
;;
|
||||
state )
|
||||
grep -sq "blocks.*\[$2\]\$" /proc/mdstat ||
|
||||
|
|
|
|||
|
|
@ -4,6 +4,8 @@ function names_create() {
|
|||
local NAME=$2
|
||||
local NEG_TEST=$3
|
||||
|
||||
is_raid_foreign $DEVNAME
|
||||
|
||||
if [[ -z "$NAME" ]]; then
|
||||
mdadm -CR "$DEVNAME" -l0 -n 1 $dev0 --force
|
||||
else
|
||||
|
|
@ -30,6 +32,7 @@ function names_verify() {
|
|||
local DEVNODE_NAME="$1"
|
||||
local WANTED_LINK="$2"
|
||||
local WANTED_NAME="$3"
|
||||
local EXPECTED=""
|
||||
|
||||
local RES="$(mdadm -D --export $DEVNODE_NAME | grep MD_DEVNAME)"
|
||||
if [[ "$?" != "0" ]]; then
|
||||
|
|
@ -38,7 +41,12 @@ function names_verify() {
|
|||
fi
|
||||
|
||||
if [[ "$WANTED_LINK" != "empty" ]]; then
|
||||
local EXPECTED="MD_DEVNAME=$WANTED_LINK"
|
||||
EXPECTED="MD_DEVNAME=$WANTED_LINK"
|
||||
|
||||
if [ ! -b /dev/md/$WANTED_LINK ]; then
|
||||
echo "/dev/md/$WANTED_LINK doesn't exit"
|
||||
exit 1
|
||||
fi
|
||||
fi
|
||||
|
||||
if [[ "$RES" != "$EXPECTED" ]]; then
|
||||
|
|
@ -52,7 +60,11 @@ function names_verify() {
|
|||
exit 1
|
||||
fi
|
||||
|
||||
local EXPECTED="MD_NAME=$(hostname):$WANTED_NAME"
|
||||
if [ $is_foreign == "no" ]; then
|
||||
EXPECTED="MD_NAME=$(hostname):$WANTED_NAME"
|
||||
else
|
||||
EXPECTED="MD_NAME=$WANTED_NAME"
|
||||
fi
|
||||
if [[ "$RES" != "$EXPECTED" ]]; then
|
||||
echo "$RES doesn't match $EXPECTED."
|
||||
exit 1
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue