Adding upstream version 1.2.

Signed-off-by: Daniel Baumann <daniel@debian.org>

ChangeLog

@@ -1,3 +1,8 @@
+2011-01-05  Antonio Diaz Diaz  <ant_diaz@teleline.es>
+
+	* Version 1.2 released.
+	* Code cleanup. Minor fixes.
+
 2010-08-19  Antonio Diaz Diaz  <ant_diaz@teleline.es>
 
 	* Version 1.1 released.
@@ -6,7 +11,7 @@
 	  reduced to extend range of use towards gzip. Lower numbers now
 	  compress less but faster. (-1 now takes 43% less time for only
 	  20% larger compressed size).
-	* Code has been converted to "C89 + long long" from C99.
+	* Code has been converted to `C89 + long long' from C99.
 
 2010-04-05  Antonio Diaz Diaz  <ant_diaz@teleline.es>
 
@@ -15,8 +20,8 @@
 	* Using LZMA SDK 9.10 (public domain) from Igor Pavlov.
 
 
-Copyright (C) 2010 Antonio Diaz Diaz.
+Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 
 This file is a collection of facts, and thus it is not copyrightable,
-but just in case, I give you unlimited permission to copy, distribute
+but just in case, you have unlimited permission to copy, distribute and
-and modify it.
+modify it.

INSTALL

@@ -1,7 +1,7 @@
 Requirements
 ------------
 You will need a C compiler.
-I use gcc 4.3.4 and 3.3.6, but the code should compile with any
+I use gcc 4.3.5 and 3.3.6, but the code should compile with any
 standards compliant compiler.
 Gcc is available at http://gcc.gnu.org.
 
@@ -50,7 +50,7 @@ After running `configure', you can run `make' and `make install' as
 explained above.
 
 
-Copyright (C) 2010 Antonio Diaz Diaz.
+Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 
 This file is free documentation: you have unlimited permission to copy,
 distribute and modify it.

Makefile.in

@@ -17,10 +17,10 @@ objs = 7zFile.o 7zStream.o Alloc.o LzFind.o LzmaDec.o LzmaEnc.o \
 all : $(progname)
 
 $(progname) : $(objs)
-	$(CC) $(LDFLAGS) -o $(progname) $(objs)
+	$(CC) $(LDFLAGS) -o $@ $^
 
 $(progname)_profiled : $(objs)
-	$(CC) $(LDFLAGS) -pg -o $(progname)_profiled $(objs)
+	$(CC) $(LDFLAGS) -pg -o $@ $^
 
 main.o : main.c
 	$(CC) $(CPPFLAGS) $(CFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
@@ -49,14 +49,14 @@ $(VPATH)/doc/$(pkgname).info : $(VPATH)/doc/$(pkgname).texinfo
 man : $(VPATH)/doc/$(progname).1
 
 $(VPATH)/doc/$(progname).1 : $(progname)
-	help2man -n 'data compressor based on the LZMA algorithm' \
+	help2man -n 'reduces the size of files' \
-	  -o $(VPATH)/doc/$(progname).1 --no-info ./$(progname)
+	  -o $@ --no-info ./$(progname)
 
 Makefile : $(VPATH)/configure $(VPATH)/Makefile.in
 	./config.status
 
 check : all
-	@$(VPATH)/testsuite/check.sh $(VPATH)/testsuite
+	@$(VPATH)/testsuite/check.sh $(VPATH)/testsuite $(pkgversion)
 
 install : all install-man
 	if [ ! -d "$(DESTDIR)$(bindir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(bindir)" ; fi

NEWS

@@ -1,15 +1,3 @@
-Changes in version 1.1:
+Changes in version 1.2:
 
-Support for decompression of lzma-alone (.lzma) files has been added.
+Code cleanup. Minor fixes.
-
-Match length limit set by options -1 to -8 has been reduced to extend
-range of use towards gzip. Lower numbers now compress less but faster.
-(-1 now takes 43% less time for only 20% larger compressed size).
-
-(Note that the bidimensional parameter space of LZMA can't be mapped to
-a linear scale optimal for all files. If your files are large, very
-repetitive, etc, you may need to use the --match-length and
---dictionary-size options directly to achieve optimal performance).
-
-Code has been converted to "C89 + long long". A C99 compiler is no more
-needed.

README

@@ -9,18 +9,18 @@ and data archiving.
 Pdlzip is also able to decompress legacy lzma-alone (.lzma) files.
 
 Pdlzip is a public domain version of the lzip data compressor, intended
-for those who can't (or do not want) distribute GPL licensed Free
+for those who can't distribute GPL licensed Free Software. Pdlzip is
-Software. Pdlzip is written in C.
+written in C.
 
 Pdlzip uses public domain compression code from the LZMA SDK written by
 Igor Pavlov.
 
 
-Copyright (C) 2010 Antonio Diaz Diaz.
+Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 
 This file is free documentation: you have unlimited permission to copy,
 distribute and modify it.
 
 The file Makefile.in is a data file used by configure to produce the
-Makefile. It has the same copyright owner and permissions that this
+Makefile. It has the same copyright owner and permissions that configure
-file.
+itself.

configure

@@ -1,16 +1,16 @@
 #! /bin/sh
-# configure script for Pdlzip - A data compressor based on the LZMA algorithm
+# configure script for Pdlzip - Data compressor based on the LZMA algorithm
-# Copyright (C) 2010 Antonio Diaz Diaz.
+# Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 #
 # This configure script is free software: you have unlimited permission
 # to copy, distribute and modify it.
 #
-# Date of this version: 2010-08-19
+# Date of this version: 2011-01-05
 
 args=
 no_create=
 pkgname=pdlzip
-pkgversion=1.1
+pkgversion=1.2
 progname=pdlzip
 srctrigger=pdlzip.h
 
@@ -80,7 +80,7 @@ while [ -n "$1" ] ; do
 		bindir=`echo ${optarg} | sed -e 's,/$,,'` ;;
 	--datadir* | --da*)
 		datadir=`echo ${optarg} | sed -e 's,/$,,'` ;;
-	--infodir* | --in*)
+	--infodir* | --inf*)
 		infodir=`echo ${optarg} | sed -e 's,/$,,'` ;;
 	--mandir* | --ma*)
 		mandir=`echo ${optarg} | sed -e 's,/$,,'` ;;
@@ -166,8 +166,8 @@ echo "CFLAGS = ${CFLAGS}"
 echo "LDFLAGS = ${LDFLAGS}"
 rm -f Makefile
 cat > Makefile << EOF
-# Makefile for Pdlzip - A data compressor based on the LZMA algorithm
+# Makefile for Pdlzip - Data compressor based on the LZMA algorithm
-# Copyright (C) 2010 Antonio Diaz Diaz.
+# Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 # This file was generated automatically by configure. Do not edit.
 #
 # This Makefile is free software: you have unlimited permission

doc/pdlzip.1

@@ -1,13 +1,13 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.37.1.
-.TH PDLZIP "1" "August 2010" "Pdlzip 1.1" "User Commands"
+.TH PDLZIP "1" "January 2011" "Pdlzip 1.2" "User Commands"
 .SH NAME
-Pdlzip \- data compressor based on the LZMA algorithm
+Pdlzip \- reduces the size of files
 .SH SYNOPSIS
 .B pdlzip
 [\fIoptions\fR] [\fIfile\fR]
 .SH DESCRIPTION
 Pdlzip \- A "public domain" version of the lzip data compressor
-able to decompress legacy lzma\-alone (.lzma) files.
+also able to decompress legacy lzma\-alone (.lzma) files.
 .SH OPTIONS
 .TP
 \fB\-h\fR, \fB\-\-help\fR
@@ -52,8 +52,10 @@ Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,
 Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...
 .SH "REPORTING BUGS"
 Report bugs to lzip\-bug@nongnu.org
+.br
+Pdlzip home page: http://www.nongnu.org/lzip/pdlzip.html
 .SH COPYRIGHT
-Copyright \(co 2010 Antonio Diaz Diaz.
+Copyright \(co 2011 Antonio Diaz Diaz.
 Public Domain 2009 Igor Pavlov.
 .br
 This is free software: you are free to change and redistribute it.

main.c

@@ -1,6 +1,6 @@
-/*  Pdlzip - A data compressor based on the LZMA algorithm
+/*  Pdlzip - Data compressor based on the LZMA algorithm
     2009-08-14 : Igor Pavlov : Public domain
-    Copyright (C) 2010 Antonio Diaz Diaz.
+    Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 
     This program is free software: you have unlimited permission
     to copy, distribute and modify it.
@@ -48,10 +48,10 @@ static void *SzAlloc(void *p, size_t size) { p = p; return MyAlloc(size); }
 static void SzFree(void *p, void *address) { p = p; MyFree(address); }
 static ISzAlloc g_Alloc = { SzAlloc, SzFree };
 
-const char * invocation_name = 0;
 const char * const Program_name = "Pdlzip";
 const char * const program_name = "pdlzip";
-const char * const program_year    = "2010";
+const char * const program_year = "2011";
+const char * invocation_name = 0;
 
 
 struct { const char * from; const char * to; } const known_extensions[] = {
@@ -66,7 +66,7 @@ struct Lzma_options
   int match_len_limit;		/* 5..273 */
   };
 
-enum Mode { m_compress = 0, m_decompress, m_test };
+enum Mode { m_compress, m_decompress, m_test };
 char * output_filename = 0;
 
 
@@ -82,7 +82,7 @@ inline void * resize_buffer( void * buf, const int min_size )
 static void show_help()
   {
   printf( "%s - A \"public domain\" version of the lzip data compressor\n", Program_name );
-  printf( "able to decompress legacy lzma-alone (.lzma) files.\n" );
+  printf( "also able to decompress legacy lzma-alone (.lzma) files.\n" );
   printf( "\nUsage: %s [options] [file]\n", invocation_name );
   printf( "\nOptions:\n" );
   printf( "  -h, --help                 display this help and exit\n" );
@@ -104,7 +104,7 @@ static void show_help()
   printf( "Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,\n" );
   printf( "Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...\n" );
   printf( "\nReport bugs to lzip-bug@nongnu.org\n" );
-/*  printf( "Pdlzip home page: http://www.nongnu.org/lzip/pdlzip.html\n" ); */
+  printf( "Pdlzip home page: http://www.nongnu.org/lzip/pdlzip.html\n" );
   }
 
 
@@ -118,34 +118,24 @@ static void show_version()
   }
 
 
-static const char * format_num( long long num, long long limit,
+static const char * format_num( long long num )
-                                const int set_prefix )
   {
-  const char * const si_prefix[8] =
+  const char * const prefix[8] =
-    { "k", "M", "G", "T", "P", "E", "Z", "Y" };
-  const char * const binary_prefix[8] =
     { "Ki", "Mi", "Gi", "Ti", "Pi", "Ei", "Zi", "Yi" };
-  static bool si = false;
+  enum { buf_size = 16, factor = 1024 };
-  static char buf[16];
+  static char buf[buf_size];
-
-  if( set_prefix ) si = ( set_prefix > 0 );
-  {
-  const int factor = ( si ) ? 1000 : 1024;
-  const char * const *prefix = ( si ) ? si_prefix : binary_prefix;
   const char *p = "";
   int i;
-  limit = max( 999LL, min( 999999LL, limit ) );
 
-  for( i = 0; i < 8 && ( llabs( num ) > limit ||
+  for( i = 0; i < 8 && ( llabs( num ) > 9999 ||
        ( llabs( num ) >= factor && num % factor == 0 ) ); ++i )
     { num /= factor; p = prefix[i]; }
-  snprintf( buf, sizeof buf, "%lld %s", num, p );
+  snprintf( buf, buf_size, "%lld %s", num, p );
-  }
   return buf;
   }
 
 
-static long long getnum( const char * const ptr, const int bs,
+static long long getnum( const char * const ptr,
                          const long long llimit, const long long ulimit )
   {
   long long result;
@@ -167,9 +157,6 @@ static long long getnum( const char * const ptr, const int bs,
     switch( tail[0] )
       {
       case ' ': break;
-      case 'b': if( bs > 0 ) { factor = bs; exponent = 1; }
-                else bad_multiplier = true;
-                break;
       case 'Y': exponent = 8; break;
       case 'Z': exponent = 7; break;
       case 'E': exponent = 6; break;
@@ -211,7 +198,7 @@ static int get_dict_size( const char * const arg )
   if( bits >= min_dictionary_bits &&
       bits <= max_dictionary_bits && *tail == 0 )
     return ( 1 << bits );
-  return getnum( arg, 0, min_dictionary_size, max_dictionary_size );
+  return getnum( arg, min_dictionary_size, max_dictionary_size );
   }
 
 
@@ -297,7 +284,7 @@ static int lzma_Decode2( UInt64 unpackSize, CLzmaDec *state,
         { show_error( "Data error.", 0, false ); return 1; }
       if( verbosity >= 2 )
         fprintf( stderr, "lzma-alone, dictionary size %7sB.  ",
-                 format_num( state->prop.dicSize, 9999, 0 ) );
+                 format_num( state->prop.dicSize ) );
       if( verbosity >= 3 )
         fprintf( stderr, "uncompressed size %9lld, compressed size %8lld.  ",
                  total_out, total_in );
@@ -365,7 +352,8 @@ static int Decode2( CLzmaDec *state, ISeqOutStream *outStream,
         error = true;
         if( verbosity >= 0 )
           fprintf( stderr, "trailer truncated at trailer position %u;"
-                   " some checks may fail.\n", (unsigned int)(*inSize - *inPos) );
+                           " some checks may fail.\n",
+                           (unsigned int)(*inSize - *inPos) );
         for( i = *inSize - *inPos; i < trailer_size; ++i )
           inBuf[*inPos+i] = 0;
         }
@@ -474,7 +462,7 @@ static int Decode( ISeqOutStream *outStream, ISeqInStream *inStream,
       if( verbosity >= 2 )
         fprintf( stderr, "version %d, dictionary size %7sB.  ",
                  Fh_version( header ),
-                 format_num( Fh_get_dictionary_size( header ), 9999, 0 ) );
+                 format_num( Fh_get_dictionary_size( header ) ) );
 
       props[0] = 93;			/* (45 * 2) + (9 * 0) + 3 */
       ds = Fh_get_dictionary_size( header );
@@ -549,13 +537,15 @@ void show_error( const char * const msg, const int errcode, const bool help )
       fprintf( stderr, "\n" );
       }
     if( help && invocation_name && invocation_name[0] )
-      fprintf( stderr, "Try `%s --help' for more information.\n", invocation_name );
+      fprintf( stderr, "Try `%s --help' for more information.\n",
+               invocation_name );
     }
   }
 
 
 void internal_error( const char * const msg )
   {
+  if( verbosity >= 0 )
     fprintf( stderr, "%s: internal error: %s.\n", program_name, msg );
   exit( 3 );
   }
@@ -618,7 +608,7 @@ int main( const int argc, const char * const argv[] )
      to the corresponding LZMA compression modes. */
   const struct Lzma_options option_mapping[] =
     {
-    { 1 << 16,   5 },		/* -0 */
+    { 1 << 20,   5 },		/* -0 */
     { 1 << 20,   5 },		/* -1 */
     { 3 << 19,   6 },		/* -2 */
     { 1 << 21,   8 },		/* -3 */
@@ -697,7 +687,7 @@ int main( const int argc, const char * const argv[] )
       case 'h': show_help(); return 0;
       case 'k': keep_input_files = true; break;
       case 'm': encoder_options.match_len_limit =
-                getnum( arg, 0, min_match_len_limit, max_match_len ); break;
+                  getnum( arg, min_match_len_limit, max_match_len ); break;
       case 'q': verbosity = -1; break;
       case 's': encoder_options.dictionary_size = get_dict_size( arg );
                 break;
@@ -707,7 +697,7 @@ int main( const int argc, const char * const argv[] )
       case 'V': show_version(); return 0;
       default : internal_error( "uncaught option" );
       }
-    }
+    } /* end process options */
 
   if( ap_arguments( &parser ) > argind &&
       strcmp( ap_argument( &parser, argind ), "-" ) )

pdlzip.h

@@ -1,5 +1,5 @@
-/*  Pdlzip - A data compressor based on the LZMA algorithm
+/*  Pdlzip - Data compressor based on the LZMA algorithm
-    Copyright (C) 2010 Antonio Diaz Diaz.
+    Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 
     This program is free software: you have unlimited permission
     to copy, distribute and modify it.
@@ -69,31 +69,7 @@ static inline void CRC32_update_buf( uint32_t * crc, const uint8_t * const buffe
   }
 
 
-static const uint8_t magic_string[4] = { 'L', 'Z', 'I', 'P' };
+static inline int real_bits( const int value )
-
-typedef uint8_t File_header[6];		/* 0-3 magic bytes */
-					/*   4 version */
-					/*   5 coded_dict_size */
-enum { Fh_size = 6 };
-
-static inline void Fh_set_magic( File_header header )
-  {
-  memcpy( header, magic_string, 4 );
-  header[4] = 1;
-  }
-
-static inline bool Fh_verify_magic( const File_header header )
-  {
-  return ( memcmp( header, magic_string, 4 ) == 0 );
-  }
-
-static inline uint8_t Fh_version( const File_header header )
-  { return header[4]; }
-
-static inline bool Fh_verify_version( const File_header header )
-  { return ( header[4] <= 1 ); }
-
-static inline int Fh_real_bits( const int value )
   {
   int bits = 0, i, mask;
   for( i = 1, mask = 1; mask > 0; ++i, mask <<= 1 )
@@ -101,27 +77,52 @@ static inline int Fh_real_bits( const int value )
   return bits;
   }
 
-static inline int Fh_get_dictionary_size( const File_header header )
+
+static const uint8_t magic_string[4] = { 'L', 'Z', 'I', 'P' };
+
+typedef uint8_t File_header[6];		/* 0-3 magic bytes */
+					/*   4 version */
+					/*   5 coded_dict_size */
+enum { Fh_size = 6 };
+
+static inline void Fh_set_magic( File_header data )
   {
-  int sz = ( 1 << ( header[5] & 0x1F ) );
+  memcpy( data, magic_string, 4 );
+  data[4] = 1;
+  }
+
+static inline bool Fh_verify_magic( const File_header data )
+  {
+  return ( memcmp( data, magic_string, 4 ) == 0 );
+  }
+
+static inline uint8_t Fh_version( const File_header data )
+  { return data[4]; }
+
+static inline bool Fh_verify_version( const File_header data )
+  { return ( data[4] <= 1 ); }
+
+static inline int Fh_get_dictionary_size( const File_header data )
+  {
+  int sz = ( 1 << ( data[5] & 0x1F ) );
   if( sz > min_dictionary_size && sz <= max_dictionary_size )
-    sz -= ( sz / 16 ) * ( ( header[5] >> 5 ) & 0x07 );
+    sz -= ( sz / 16 ) * ( ( data[5] >> 5 ) & 0x07 );
   return sz;
   }
 
-static inline bool Fh_set_dictionary_size( File_header header, const int sz )
+static inline bool Fh_set_dictionary_size( File_header data, const int sz )
   {
   if( sz >= min_dictionary_size && sz <= max_dictionary_size )
     {
-    header[5] = Fh_real_bits( sz - 1 );
+    data[5] = real_bits( sz - 1 );
     if( sz > min_dictionary_size )
       {
-      const int base_size = 1 << header[5];
+      const int base_size = 1 << data[5];
       const int wedge = base_size / 16;
       int i;
       for( i = 7; i >= 1; --i )
         if( base_size - ( i * wedge ) >= sz )
-          { header[5] |= ( i << 5 ); break; }
+          { data[5] |= ( i << 5 ); break; }
       }
     return true;
     }
@@ -139,51 +140,51 @@ enum { Ft_size = 20 };
 static inline int Ft_versioned_size( const int version )
   { return ( ( version >= 1 ) ? 20 : 12 ); }
 
-static inline uint32_t Ft_get_data_crc( const File_trailer trailer )
+static inline uint32_t Ft_get_data_crc( const File_trailer data )
   {
   uint32_t tmp = 0;
   int i;
-  for( i = 3; i >= 0; --i ) { tmp <<= 8; tmp += trailer[i]; }
+  for( i = 3; i >= 0; --i ) { tmp <<= 8; tmp += data[i]; }
   return tmp;
   }
 
-static inline void Ft_set_data_crc( File_trailer trailer, uint32_t crc )
+static inline void Ft_set_data_crc( File_trailer data, uint32_t crc )
   {
   int i;
-  for( i = 0; i <= 3; ++i ) { trailer[i] = (uint8_t)crc; crc >>= 8; }
+  for( i = 0; i <= 3; ++i ) { data[i] = (uint8_t)crc; crc >>= 8; }
   }
 
-static inline long long Ft_get_data_size( const File_trailer trailer )
+static inline long long Ft_get_data_size( const File_trailer data )
   {
   long long tmp = 0;
   int i;
-  for( i = 11; i >= 4; --i ) { tmp <<= 8; tmp += trailer[i]; }
+  for( i = 11; i >= 4; --i ) { tmp <<= 8; tmp += data[i]; }
   return tmp;
   }
 
-static inline void Ft_set_data_size( File_trailer trailer, long long sz )
+static inline void Ft_set_data_size( File_trailer data, long long sz )
   {
   int i;
-  for( i = 4; i <= 11; ++i ) { trailer[i] = (uint8_t)sz; sz >>= 8; }
+  for( i = 4; i <= 11; ++i ) { data[i] = (uint8_t)sz; sz >>= 8; }
   }
 
-static inline long long Ft_get_member_size( const File_trailer trailer )
+static inline long long Ft_get_member_size( const File_trailer data )
   {
   long long tmp = 0;
   int i;
-  for( i = 19; i >= 12; --i ) { tmp <<= 8; tmp += trailer[i]; }
+  for( i = 19; i >= 12; --i ) { tmp <<= 8; tmp += data[i]; }
   return tmp;
   }
 
-static inline void Ft_set_member_size( File_trailer trailer, long long sz )
+static inline void Ft_set_member_size( File_trailer data, long long sz )
   {
   int i;
-  for( i = 12; i <= 19; ++i ) { trailer[i] = (uint8_t)sz; sz >>= 8; }
+  for( i = 12; i <= 19; ++i ) { data[i] = (uint8_t)sz; sz >>= 8; }
   }
 
 
+/* defined in main.c */
 extern int verbosity;
 
-void cleanup_and_fail( const int retval );
 void show_error( const char * const msg, const int errcode, const bool help );
 void internal_error( const char * const msg );

testsuite/check.sh

@@ -1,6 +1,6 @@
 #! /bin/sh
-# check script for Pdlzip - A data compressor based on the LZMA algorithm
+# check script for Pdlzip - Data compressor based on the LZMA algorithm
-# Copyright (C) 2010 Antonio Diaz Diaz.
+# Copyright (C) 2010, 2011 Antonio Diaz Diaz.
 #
 # This script is free software: you have unlimited permission
 # to copy, distribute and modify it.
@@ -19,18 +19,23 @@ fi
 
 if [ -d tmp ] ; then rm -rf tmp ; fi
 mkdir tmp
-printf "testing pdlzip..."
+printf "testing pdlzip-%s..." "$2"
 cd "${objdir}"/tmp
 
 cat "${testdir}"/test.txt > in || framework_failure
 fail=0
 
 "${LZIP}" -t "${testdir}"/test.lz || fail=1
+printf .
 "${LZIP}" -cd "${testdir}"/test.lz > copy || fail=1
 cmp in copy || fail=1
+printf .
+
 "${LZIP}" -t "${testdir}"/test.lzma || fail=1
+printf .
 "${LZIP}" -cd "${testdir}"/test.lzma > copy || fail=1
 cmp in copy || fail=1
+printf .
 
 for i in s4Ki 0 1 2 3 4 5 6 7 8s16 9s16 ; do
 	"${LZIP}" -k -$i in || fail=1
@@ -56,6 +61,11 @@ for i in s4Ki 0 1 2 3 4 5 6 7 8s16 9s16 ; do
 	printf .
 done
 
+"${LZIP}" -$i < in > anyothername || fail=1
+"${LZIP}" -dq anyothername || fail=1
+cmp in anyothername.out || fail=1
+printf .
+
 echo
 if [ ${fail} = 0 ] ; then
 	echo "tests completed successfully."