lzip/xlunzip
1
0
Fork 0
Code Issues Activity

Merging upstream version 0.7.

Browse source 
Signed-off-by: Daniel Baumann <daniel@debian.org>
This commit is contained in:
Daniel Baumann 2025-02-17 22:51:57 +01:00
parent d419679950
commit ca990cc36e
Signed by: daniel
GPG key ID: FBB4F0E80A80222F
15 changed files with 74 additions and 74 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
ChangeLog
View file

@ -1,3 +1,8 @@
2021-01-01 Antonio Diaz Diaz <antonio@gnu.org>
* Version 0.7 released.
* main.c (main): Do not open output if input is a terminal.
2020-06-24 Antonio Diaz Diaz <antonio@gnu.org>
* Version 0.6 released.
@ -51,7 +56,7 @@
* Tests the code shipped in linux patches before june 2018.
Copyright (C) 2016-2020 Antonio Diaz Diaz.
Copyright (C) 2016-2021 Antonio Diaz Diaz.
This file is a collection of facts, and thus it is not copyrightable,
but just in case, you have unlimited permission to copy, distribute, and

4
INSTALL
View file

@ -1,6 +1,6 @@
Requirements
------------
You will need a C99 compiler. (gcc 2.95 or newer is recommended).
You will need a C99 compiler. (gcc 3.3.6 or newer is recommended).
I use gcc 6.1.0 and 4.1.2, but the code should compile with any standards
compliant compiler.
Gcc is available at http://gcc.gnu.org.
@ -69,7 +69,7 @@ After running 'configure', you can run 'make' and 'make install' as
explained above.
Copyright (C) 2016-2020 Antonio Diaz Diaz.
Copyright (C) 2016-2021 Antonio Diaz Diaz.
This file is free documentation: you have unlimited permission to copy,
distribute, and modify it.

20
NEWS
View file

@ -1,19 +1,3 @@
Changes in version 0.6:
Changes in version 0.7:
Option '-o, --output' now behaves like '-c, --stdout', but sending the
output unconditionally to a file instead of to standard output. See the new
description of '-o' in the manual. This change is not backwards compatible.
Therefore commands like:
xlunzip -d -o foo - bar.lz < foo.lz
must now be split into:
xlunzip -d -o foo - < foo.lz
xlunzip -d bar.lz
or rewritten as:
xlunzip -d - bar.lz < foo.lz > foo
In-place decompression of concatenated files should now work for any
combination of files as long as they fit in memory and their total
decompressed size is smaller than LONG_MAX minus a small extra space.
The README file now includes an analysis of the amount of memory required
for in-place decompression.
Xlunzip now does not even open the output file if the input file is a terminal.

24
README
View file

@ -61,8 +61,8 @@ data is uncompressible. The worst case is very compressible data followed by
uncompressible data because in this case the output pointer increases faster
when the input pointer is smaller.
| * <-- input pointer
| * , <-- output pointer
| * <-- input pointer (*)
| * , <-- output pointer (,)
| * , '
| x ' <-- overrun (x)
memory | * ,'
@ -71,7 +71,7 @@ address | * ,'
| ,'
| ,'
|,'
`--------------------------
'--------------------------
time
All we need to know to calculate the minimum required extra space is:
@ -82,19 +82,23 @@ All we need to know to calculate the minimum required extra space is:
The maximum expansion ratio of LZMA data is of about 1.4%. Rounding this up
to 1/64 (1.5625%) and adding 36 bytes per input member, the extra space
required to decompress lzip data in place is:
extra_bytes = ( compressed_size >> 6 ) + members * 36
Using the compressed size to calculate the extra_bytes (as in the equation
Using the compressed size to calculate the extra_bytes (as in the formula
above) may slightly overestimate the amount of space required in the worst
case. But calculating the extra_bytes from the uncompressed size (as does
linux) is wrong (and inefficient for high compression ratios). The formula
used in arch/x86/boot/header.S
extra_bytes = (uncompressed_size >> 8) + 65536
fails with 1 MB of zeros followed by 8 MB of random data, and wastes memory
for compression ratios > 4:1.
linux currently) is wrong (and inefficient for high compression ratios). The
formula used in arch/x86/boot/header.S
extra_bytes = ( uncompressed_size >> 8 ) + 65536
fails to decompress 1 MB of zeros followed by 8 MB of random data, wastes
memory for compression ratios larger than 4:1, and does not even consider
multimember data.
Copyright (C) 2016-2020 Antonio Diaz Diaz.
Copyright (C) 2016-2021 Antonio Diaz Diaz.
This file is free documentation: you have unlimited permission to copy,
distribute, and modify it.

2
carg_parser.c
View file

@ -1,5 +1,5 @@
/* Arg_parser - POSIX/GNU command line argument parser. (C version)
Copyright (C) 2006-2020 Antonio Diaz Diaz.
Copyright (C) 2006-2021 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided

2
carg_parser.h
View file

@ -1,5 +1,5 @@
/* Arg_parser - POSIX/GNU command line argument parser. (C version)
Copyright (C) 2006-2020 Antonio Diaz Diaz.
Copyright (C) 2006-2021 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided

6
configure vendored
View file

@ -1,12 +1,12 @@
#! /bin/sh
# configure script for Xlunzip - Test tool for the lzip_decompress linux module
# Copyright (C) 2016-2020 Antonio Diaz Diaz.
# Copyright (C) 2016-2021 Antonio Diaz Diaz.
#
# This configure script is free software: you have unlimited permission
# to copy, distribute, and modify it.
pkgname=xlunzip
pkgversion=0.6
pkgversion=0.7
progname=xlunzip
srctrigger=doc/${progname}.1
@ -167,7 +167,7 @@ echo "LDFLAGS = ${LDFLAGS}"
rm -f Makefile
cat > Makefile << EOF
# Makefile for Xlunzip - Test tool for the lzip_decompress linux module
# Copyright (C) 2016-2020 Antonio Diaz Diaz.
# Copyright (C) 2016-2021 Antonio Diaz Diaz.
# This file was generated automatically by configure. Don't edit.
#
# This Makefile is free software: you have unlimited permission

2
decompress_lunzip.c
View file

@ -1,7 +1,7 @@
/*
* Wrapper for decompressing LZIP-compressed kernel, initramfs, and initrd
*
* Copyright (C) 2016-2020 Antonio Diaz Diaz.
* Copyright (C) 2016-2021 Antonio Diaz Diaz.
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/

6
doc/xlunzip.1
View file

@ -1,5 +1,5 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.1.
.TH XLUNZIP "1" "June 2020" "xlunzip 0.6" "User Commands"
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.16.
.TH XLUNZIP "1" "January 2021" "xlunzip 0.7" "User Commands"
.SH NAME
xlunzip \- test tool for the lzip_decompress linux module
.SH SYNOPSIS
@ -86,7 +86,7 @@ Report bugs to lzip\-bug@nongnu.org
.br
Xlunzip home page: http://www.nongnu.org/lzip/xlunzip.html
.SH COPYRIGHT
Copyright \(co 2020 Antonio Diaz Diaz.
Copyright \(co 2021 Antonio Diaz Diaz.
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
.br
This is free software: you are free to change and redistribute it.

21
in_place.c
View file

@ -1,5 +1,5 @@
/* Xlunzip - Test tool for the lzip_decompress linux module
Copyright (C) 2016-2020 Antonio Diaz Diaz.
Copyright (C) 2016-2021 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -84,14 +84,15 @@ static uint8_t * read_file( const int infd, long * const buffer_sizep,
struct File_sizes
{
unsigned long long csize;
unsigned long long dsize;
unsigned long long csize; /* compressed size */
unsigned long long dsize; /* decompressed size */
unsigned long tsize; /* trailing data size */
long members;
long trailing;
};
static const char * set_file_sizes( struct File_sizes * const file_sizes,
const uint8_t * const buffer, const long file_size )
const uint8_t * const buffer,
const unsigned long file_size )
{
if( file_size <= Lh_size ) return "File ends unexpectedly at member header.";
if( file_size < min_member_size ) return "Input file is too short.";
@ -101,8 +102,8 @@ static const char * set_file_sizes( struct File_sizes * const file_sizes,
if( !Lh_verify_version( *header ) )
return "Version of lzip member format not supported.";
file_sizes->csize = file_sizes->dsize = 0;
file_sizes->members = file_sizes->trailing = 0;
file_sizes->csize = file_sizes->dsize = file_sizes->tsize = 0;
file_sizes->members = 0;
unsigned long pos = file_size; /* always points to a header or to EOF */
while( pos >= min_member_size )
{
@ -128,7 +129,7 @@ static const char * set_file_sizes( struct File_sizes * const file_sizes,
}
if( file_sizes->csize == 0 && file_size - pos > 0 )
{
file_sizes->trailing = file_size - pos;
file_sizes->tsize = file_size - pos;
header = (const Lzip_header *)( buffer + pos );
if( file_size - pos > Lh_size &&
Lh_verify_magic( *header ) && Lh_verify_version( *header ) )
@ -140,7 +141,7 @@ static const char * set_file_sizes( struct File_sizes * const file_sizes,
++file_sizes->members;
}
if( pos != 0 || file_sizes->csize == 0 ) return "Can't get file sizes.";
if( file_sizes->csize + file_sizes->trailing != (unsigned long)file_size )
if( file_sizes->csize + file_sizes->tsize != file_size )
return "Error getting file sizes.";
if( file_sizes->csize > LONG_MAX ) return "File is larger than LONG_MAX.";
if( file_sizes->dsize > LONG_MAX ) return "Data is larger than LONG_MAX.";
@ -192,8 +193,6 @@ int decompress_in_place( const int infd, struct Pretty_print * const pp,
buffer_size = target_buffer_size;
const long cbegin = buffer_size - csize; /* overwrite trailing data */
if( cbegin > 0 ) memmove( buffer + cbegin, buffer, csize );
/*fprintf( stderr, "buffer_size = %ld, cbegin = %ld, extra_bytes = %ld\n",
buffer_size, cbegin, extra_bytes );*/
long in_pos, out_pos;
int retval;

2
linux_lzip.h
View file

@ -4,7 +4,7 @@
/*
* LZIP decompressor
*
* Copyright (C) 2016-2020 Antonio Diaz Diaz.
* Copyright (C) 2016-2021 Antonio Diaz Diaz.
*/
/* Return values (< 0 = Error) */

5
lzip.h
View file

@ -1,5 +1,5 @@
/* Xlunzip - Test tool for the lzip_decompress linux module
Copyright (C) 2016-2020 Antonio Diaz Diaz.
Copyright (C) 2016-2021 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -75,6 +75,9 @@ static inline unsigned long long Lt_get_member_size( const Lzip_trailer data )
}
static inline void set_retval( int * retval, const int new_val )
{ if( *retval < new_val ) *retval = new_val; }
static const char * const mem_msg = "Not enough memory.";
/* defined in in_place.c */

2
lzip_decompress.c
View file

@ -1,7 +1,7 @@
/*
* LZIP decompressor
*
* Copyright (C) 2016-2020 Antonio Diaz Diaz.
* Copyright (C) 2016-2021 Antonio Diaz Diaz.
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/

37
main.c
View file

@ -1,5 +1,5 @@
/* Xlunzip - Test tool for the lzip_decompress linux module
Copyright (C) 2016-2020 Antonio Diaz Diaz.
Copyright (C) 2016-2021 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -75,7 +75,7 @@ static void show_error( const char * const msg, const int errcode,
const bool help );
static const char * const program_name = "xlunzip";
static const char * const program_year = "2020";
static const char * const program_year = "2021";
static const char * invocation_name = "xlunzip"; /* default value */
static const struct { const char * from; const char * to; } known_extensions[] = {
@ -393,6 +393,19 @@ static void signal_handler( int sig )
}
static bool check_tty_in( const char * const input_filename, const int infd,
const bool testing, int * const retval )
{
if( isatty( infd ) ) /* for example /dev/tty */
{ show_file_error( input_filename,
"I won't read compressed data from a terminal.", 0 );
close( infd ); set_retval( retval, 1 );
if( !testing ) cleanup_and_fail( *retval );
return false; }
return true;
}
/* Set permissions, owner, and times. */
static void close_and_set_permissions( const struct stat * const in_statsp )
{
@ -538,9 +551,6 @@ void show_results( struct Pretty_print * const pp, const long in_pos,
}
static inline void set_retval( int * retval, const int new_val )
{ if( *retval < new_val ) *retval = new_val; }
static void show_error( const char * const msg, const int errcode,
const bool help )
{
@ -692,10 +702,12 @@ int main( const int argc, const char * const argv[] )
struct stat in_stats;
const struct stat * in_statsp;
Pp_set_name( &pp, filenames[i] );
if( strcmp( filenames[i], "-" ) == 0 )
{
if( stdin_used ) continue; else stdin_used = true;
infd = STDIN_FILENO;
if( !check_tty_in( pp.name, infd, testing, &retval ) ) continue;
if( one_to_one ) { outfd = STDOUT_FILENO; output_filename[0] = 0; }
}
else
@ -703,24 +715,15 @@ int main( const int argc, const char * const argv[] )
input_filename = filenames[i];
infd = open_instream( input_filename, &in_stats, one_to_one );
if( infd < 0 ) { set_retval( &retval, 1 ); continue; }
if( one_to_one )
if( !check_tty_in( pp.name, infd, testing, &retval ) ) continue;
if( one_to_one ) /* open outfd after verifying infd */
{
set_d_outname( input_filename, extension_index( input_filename ) );
if( !open_outstream( force, true ) )
{ set_retval( &retval, 1 ); close( infd ); infd = -1; continue; }
{ close( infd ); infd = -1; set_retval( &retval, 1 ); continue; }
}
}
Pp_set_name( &pp, input_filename );
if( isatty( infd ) ) /* for example /dev/tty */
{
show_file_error( pp.name,
"I won't read compressed data from a terminal.", 0 );
set_retval( &retval, 1 );
if( testing ) { close( infd ); infd = -1; continue; }
cleanup_and_fail( retval );
}
if( to_file && outfd < 0 ) /* open outfd after verifying infd */
{
output_filename = resize_buffer( output_filename,

6
testsuite/check.sh
View file

@ -1,6 +1,6 @@
#! /bin/sh
# check script for Xlunzip - Test tool for the lzip_decompress linux module
# Copyright (C) 2016-2020 Antonio Diaz Diaz.
# Copyright (C) 2016-2021 Antonio Diaz Diaz.
#
# This script is free software: you have unlimited permission
# to copy, distribute, and modify it.
@ -104,6 +104,8 @@ printf "to be overwritten" > copy || framework_failure
cmp in copy || test_failed $LINENO
printf "to be overwritten" > copy || framework_failure
"${LZIP}" -d -o copy < "${in_lz}" 2> /dev/null
[ $? = 1 ] || test_failed $LINENO
"${LZIP}" -df -o copy < "${in_lz}" || test_failed $LINENO
cmp in copy || test_failed $LINENO
rm -f out copy || framework_failure
@ -228,9 +230,9 @@ cat "${in_lz}" > ingin.lz || framework_failure
printf "g" >> ingin.lz || framework_failure
cat "${in_lz}" >> ingin.lz || framework_failure
"${LZIP}" -t ingin.lz || test_failed $LINENO
"${LZIP}" -t < ingin.lz || test_failed $LINENO
"${LZIP}" -cd ingin.lz > copy || test_failed $LINENO
cmp in copy || test_failed $LINENO
"${LZIP}" -t < ingin.lz || test_failed $LINENO
"${LZIP}" -d < ingin.lz > copy || test_failed $LINENO
cmp in copy || test_failed $LINENO